Topographic Data Collection in Arlington, TN
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Shelby & the Memphis, TN-MS-AR MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Arlington, TN
Low End
$1,150
High End
$4,000
Turnaround
3-5 days
Cost ranges are based on market data for Memphis, TN-MS-AR MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Arlington
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Arlington. Here's what's driving demand:
Arlington is a fast-growing northeast Shelby County suburb positioned between Bartlett and Millington. The town has experienced rapid residential development driven by its location along the Highway 64 corridor and its relatively affordable housing compared to Bartlett and Germantown. Master-planned communities and single-family subdivisions are expanding eastward into the previously rural areas of Shelby County. Commercial development is concentrated along the Highway 64 corridor, with retail centers, restaurants, and service businesses serving the growing residential population. The Arlington Industrial Park on the west side attracts light industrial and distribution tenants. Infrastructure projects include road widening along Highway 64, water and sewer extensions for the eastern growth areas, and a new high school to serve the expanding population. The town's growth strategy focuses on maintaining a small-town character while accommodating rapid residential expansion.
Major Developers Active in the Area:
Tennessee drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Arlington meets all federal and state requirements.
Drone Regulations in Arlington, TN
Airports & LAANC Zones
- MEM — Memphis International Airport (Class C airspace, approximately 20 NM southwest)
- NQA — Millington Municipal Airport (Class D airspace, approximately 8 NM northwest)
- M54 — Charles W Baker Airport (uncontrolled, approximately 10 NM south)
Restricted Airspace
- Arlington sits northeast of the Memphis Class C airspace. The outer ring extends to 10,000 ft MSL within 10 NM of MEM, which may reach the western edge of Arlington. Most of Arlington is outside the Class C surface area but may be within the outer ring. Check FAA UAS Facility Maps for exact boundaries.
- Millington Municipal Airport (NQA) Class D airspace is approximately 8 NM to the northwest. The Class D surface area (4.4 NM radius, surface to 3,000 ft MSL) may not extend to Arlington, but operators should check the FAA UAS Facility Maps for the exact boundary.
- Arlington sits in mostly uncontrolled Class G airspace, making it one of the less restrictive areas in the Memphis metro for commercial drone operations. However, operators should always check current airspace classifications before flying.
Local Ordinances
The Town of Arlington does not maintain a dedicated municipal drone ordinance. Commercial operators follow FAA Part 107 rules and Tennessee state law. Commercial takeoff and landing from Arlington town parks should be coordinated with the Arlington Parks and Recreation Department. The Arlington Sports Complex and the Don Williams Park are popular recreational facilities where drone operations should be coordinated with town staff. Operators working near the industrial areas along Highway 70 or the rail corridor should be aware of private property boundaries and notify facility management before conducting inspections.
All drone operations in Arlington must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Arlington airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Arlington, TN
How much does a drone topographic data collection cost in Arlington?
Drone topographic data collection projects in Arlington typically range from $1,150 to $4,000 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Arlington, TN
Do I need LAANC authorization to fly a drone in Arlington?
Most of Arlington sits in uncontrolled Class G airspace, but the western edge may fall within the Memphis Class C outer ring (10 NM radius, up to 10,000 ft MSL). Check the FAA UAS Facility Maps for your specific flight location. The Millington Class D airspace is approximately 8 NM to the northwest and may not extend to Arlington. Always verify current airspace before flying.
Can I fly a drone over the Arlington Sports Complex?
Commercial drone takeoff and landing from the Arlington Sports Complex should be coordinated with the Arlington Parks and Recreation Department. The complex is a popular youth sports venue, so drone operations should be scheduled during non-event hours. The town does not have a formal prohibition on drone use in parks, but staff notification is required for commercial operations.
How much does an aerial imaging cost for a residential subdivision in Arlington?
Topographic data collection projects for residential subdivision development in Arlington typically cost $1,150 to $4,000 depending on acreage. Construction monitoring for active subdivision builds runs $340 to $1,650 per visit. Aerial progress photography for developer marketing costs $160 to $1,000 per session.
What should I know about flying a drone near the Arlington Industrial Park?
The Arlington Industrial Park is private property. Commercial drone inspections of industrial buildings require coordination with facility management. Notify security before launching, and be aware of truck traffic and equipment movement. Industrial park tenants are common clients for roof inspections and façade documentation.
Is Arlington a good location for commercial drone operations with less airspace restrictions?
Yes. Arlington sits in mostly uncontrolled Class G airspace on the northeast edge of the Memphis metro, making it one of the less restrictive areas for commercial drone operations. While the western edge may require LAANC for the Memphis Class C outer ring, most of the town is clear of controlled airspace. Operators must still hold an FAA Part 107 certificate.
All Aerial Imaging Services in Arlington, TN
Compare pricing across all aerial imaging services available in Arlington, Tennessee.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,150 | $4,000 | 3-5 days |
| Drone Inspection | $215 | $1,700 | 1-2 days |
| LiDAR Scanning | $1,900 | $7,500 | 5-7 days |
| Environmental Monitoring | $680 | $2,700 | 2-4 days |
| Aerial Imagery | $160 | $1,000 | 1-2 days |
| Construction Monitoring | $340 | $1,650 | 1-3 days per visit |
| Real Estate Photography | $170 | $700 | 1-2 days |
| Roof Inspection | $245 | $880 | 1-2 days |
Pricing ranges are based on market data for Memphis, TN-MS-AR MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Arlington, TN
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Arlington, TN?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Arlington and the surrounding Memphis, TN-MS-AR MSA area.
Apply to Join