Topographic Data Collection in Clarksville, TN
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Montgomery & the Clarksville, TN-KY MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Clarksville, TN
Low End
$1,300
High End
$4,500
Turnaround
3-5 days
Cost ranges are based on market data for Clarksville, TN-KY MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Clarksville
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Clarksville. Here's what's driving demand:
Clarksville is the fastest-growing metropolitan area in the United States according to 2023 Census data, with the Clarksville, TN-KY MSA expanding at over 4% annually. The population surge is driven by Fort Campbell military personnel, Austin Peay State University growth, and Nashville spillover as commuters seek affordable housing 45 minutes northwest of Music City. Major construction activity includes the I-24 widening project through Montgomery County, the Providence mixed-use development in southeast Clarksville, and continuous residential subdivision expansion along the Rossview Road and Exit 8 corridors. The city has approved thousands of new residential lots since 2022, with master-planned communities like Autumn Ridge and Eastgate Springs driving single-family demand. Commercial development follows population growth along Wilma Rudolph Boulevard and Fort Campbell Boulevard, where retail centers, medical offices, and hotels are under construction. The Clarksville-Montgomery County School System is building new schools to accommodate enrollment growth, and the city is investing in water and sewer infrastructure to support the expanding tax base. Industrial development near the Gateway Medical Center and the Exit 4 interchange adds warehouse and light manufacturing square footage each quarter.
Major Developers Active in the Area:
Tennessee drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Clarksville meets all federal and state requirements.
Drone Regulations in Clarksville, TN
Airports & LAANC Zones
- M04 — Clarksville-Montgomery County Regional Airport (Outbaugh Field, uncontrolled Class G airspace)
- BGF — Campbell Army Airfield at Fort Campbell (military, restricted airspace)
- NQA — Nashville International Airport (Class C, approximately 50 NM south)
Restricted Airspace
- Fort Campbell restricted military airspace (R-3403 and R-3404) along the Kentucky border. LAANC authorization may be required for commercial drone operations near the base perimeter. Consult the FAA UAS Facility Map for sectorized altitude grids.
- Campbell Army Airfield (BGF) has a military operating area that extends into northern Montgomery County. Drone flights within 5 NM of the airfield should coordinate with base operations.
- Austin Peay State University campus and Fort Campbell Boulevard corridor have high-density population areas where Part 107 overhead flight restrictions apply.
- The Cumberland River corridor through downtown Clarksville has no specific TFR but bridges and infrastructure may trigger FAA critical facility restrictions.
Local Ordinances
Clarksville does not have a city-specific drone ordinance beyond state law, but commercial operators should coordinate with Montgomery County Parks and Recreation for takeoff and landing in public parks. Fort Campbell military installation has its own security restrictions independent of FAA airspace rules, and drone operations near the base perimeter may be subject to military law enforcement intervention. The Clarksville Streets Department requires notification for any drone work in the public right-of-way near active construction zones.
All drone operations in Clarksville must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Clarksville airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Clarksville, TN
How much does a drone topographic data collection cost in Clarksville?
Drone topographic data collection projects in Clarksville typically range from $1,300 to $4,500 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Clarksville, TN
Do I need LAANC authorization to fly a drone in Clarksville?
Most of Clarksville is in uncontrolled Class G airspace around Outbaugh Field (M04), so LAANC is generally not required. However, Fort Campbell restricted military airspace (R-3403/R-3404) along the Kentucky border may require authorization. Always check the FAA UAS Facility Map for the specific sector grids near the base perimeter.
Can I fly a drone near Fort Campbell Army base?
Drone operations near Fort Campbell require extra caution. The base has restricted military airspace (R-3403 and R-3404) and Campbell Army Airfield (BGF) with active military helicopter traffic. Commercial pilots should review the FAA UAS Facility Map and may need LAANC authorization in sectors that overlap the restricted areas. Contact base operations if flying within 5 NM of the airfield.
What makes Clarksville one of the fastest-growing cities for drone aerial imaging demand?
The Clarksville MSA was the #1 fastest-growing metropolitan area in the United States in 2023, driven by Fort Campbell military families, Austin Peay State University expansion, and Nashville commuter spillover. Thousands of new residential lots and commercial projects along I-24 create sustained demand for topographic data collection, construction monitoring, and real estate photography.
How much does a drone topographic data collection cost in Clarksville?
Topographic drone data collection in Clarksville typically ranges from $1,300 to $4,500 depending on acreage and terrain. The rolling hills of Montgomery County and creek corridors can increase complexity. Construction monitoring visits cost $350 to $1,800 per session, and LiDAR scanning runs $2,200 to $8,000 for detailed terrain mapping.
Are there any local Clarksville ordinances for flying drones in parks?
Clarksville does not have a city-specific drone ordinance, but commercial takeoff and landing in public parks requires coordination with Montgomery County Parks and Recreation. Liberty Park and Clarksville Greenway are popular launch sites, but operators should avoid flying over crowds per FAA Part 107 guidelines.
Can I fly a drone over the Cumberland River in downtown Clarksville?
The Cumberland River corridor through downtown is in uncontrolled Class G airspace, so no LAANC authorization is needed for most flights. However, bridges and critical infrastructure may trigger FAA restrictions, and flying over the marina or crowded riverfront areas requires Part 107 compliance. Avoid overhead flight over vehicles and people not directly involved in the operation.
All Aerial Imaging Services in Clarksville, TN
Compare pricing across all aerial imaging services available in Clarksville, Tennessee.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,300 | $4,500 | 3-5 days |
| Drone Inspection | $225 | $1,800 | 1-2 days |
| LiDAR Scanning | $2,200 | $8,000 | 5-7 days |
| Environmental Monitoring | $700 | $2,800 | 2-4 days |
| Aerial Imagery | $150 | $1,000 | 1-2 days |
| Construction Monitoring | $350 | $1,800 | 1-3 days per visit |
| Real Estate Photography | $175 | $700 | 1-2 days |
| Roof Inspection | $250 | $900 | 1-2 days |
Pricing ranges are based on market data for Clarksville, TN-KY MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Clarksville, TN
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Clarksville, TN?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Clarksville and the surrounding Clarksville, TN-KY MSA area.
Apply to Join