Topographic Data Collection in Daytona Beach, FL
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Volusia County & the Deltona-Daytona Beach-Ormond Beach MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Daytona Beach, FL
Low End
$1,500
High End
$5,000
Turnaround
3-7 days
Cost ranges are based on market data for Deltona-Daytona Beach-Ormond Beach MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Daytona Beach
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Daytona Beach. Here's what's driving demand:
Daytona Beach is experiencing redevelopment driven by the waterfront transformation, the Daytona International Speedway area development, and the growing healthcare and education sectors. Major projects include the One Daytona mixed-use development, the riverfront redevelopment along the Halifax River, the Embry-Riddle Aeronautical University campus expansion, and the Halifax Health Medical Center expansion. The city is home to Embry-Riddle Aeronautical University, Bethune-Cookman University, and Daytona State College. Infrastructure projects include the I-95/I-4 interchange reconstruction, the International Speedway Boulevard improvements, and the beach driving accessibility improvements.
Major Developers Active in the Area:
Florida drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Daytona Beach meets all federal and state requirements.
Drone Regulations in Daytona Beach, FL
Airports & LAANC Zones
- DAB — Daytona Beach International Airport (Class C airspace)
- OMN — Massey Ranch Airpark (Class E airspace, approximately 15 NM south)
- XVL — Spruce Creek Fly-in Airport (private residential airpark, Class E airspace)
Restricted Airspace
- Daytona Beach International (DAB) has Class C airspace covering the city and surrounding Volusia County coast. LAANC required for commercial drone operations.
- Daytona International Speedway has temporary flight restrictions during major racing events (Daytona 500, Coke Zero 400). TFRs typically extend 3 NM radius, surface to 3,000 ft AGL.
- NASA Kennedy Space Center launch corridors may extend over the Daytona Beach area during certain launch trajectories. Check FAA TFR database before flights.
- Canaveral National Seashore to the south prohibits drone takeoff and landing without NPS permits.
- Coast Guard Sector Jacksonville maintains TFR zones along the Volusia County coastline during migrant interdiction operations.
Local Ordinances
The City of Daytona Beach requires a permit for commercial drone takeoff and landing on city property, including public beaches, the Boardwalk area, and the downtown riverfront. Volusia County requires permits for drone operations in county parks and beach accesses. Daytona Beach International Airport approach corridors cover the city. Daytona International Speedway has temporary flight restrictions during major racing events. The beach driving areas have additional drone restrictions during turtle nesting season (May through October).
All drone operations in Daytona Beach must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Daytona Beach airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Daytona Beach, FL
How much does a drone topographic data collection cost in Daytona Beach?
Drone topographic data collection projects in Daytona Beach typically range from $1,500 to $5,000 with 3-7 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Daytona Beach, FL
Do I need LAANC authorization to fly a drone in Daytona Beach?
Yes. Daytona Beach International (DAB) has Class C airspace covering the city. LANC authorization is required for commercial drone operations within this zone. Check the FAA B4UFLY app for specific boundaries.
Can I fly a drone during Daytona 500 or other Speedway events?
No. Daytona International Speedway has temporary flight restrictions (TFRs) during major racing events. TFRs typically extend 3 nautical miles radius, surface to 3,000 ft AGL. The Daytona 500 and Coke Zero 400 are the largest events with the most restrictive TFRs. Always check the FAA TFR database before flying near the Speedway.
What is the cost of an aerial imaging for a construction site in Daytona Beach?
Topographic drone data collection in Daytona Beach typically ranges from $1,500 to $5,000 depending on acreage. Construction monitoring visits cost $400 to $2,200 per session. LiDAR scanning runs $2,500 to $9,500. The flat coastal terrain makes aerial mapping efficient for waterfront and Speedway-area development.
Can I fly a drone over Daytona Beach?
Commercial drone takeoff and landing on Daytona Beach requires a permit from the City of Daytona Beach. The beach is unique for allowing vehicle driving, but drone operations are separately regulated. During sea turtle nesting season (May through October), additional state restrictions apply. Flying over crowded beaches violates FAA Part 107 safety guidelines.
Are there restrictions from Kennedy Space Center launches?
NASA Kennedy Space Center launch corridors may extend over the Daytona Beach area during certain launch trajectories. TFRs are activated 30-60 minutes before launch. Always check the FAA TFR database and launch schedules before flying. SpaceX launches have increased in frequency, making TFR checks essential.
Does Florida require state drone registration for commercial operators?
No. Florida does not require state drone registration. Operators need a valid FAA Part 107 Remote Pilot Certificate and must comply with Florida Statutes 934.50 privacy restrictions. Volusia County and the City of Daytona Beach may require local permits for takeoff and landing on public property.
All Aerial Imaging Services in Daytona Beach, FL
Compare pricing across all aerial imaging services available in Daytona Beach, Florida.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,500 | $5,000 | 3-7 days |
| Drone Inspection | $500 | $2,800 | 1-3 days |
| LiDAR Scanning | $2,500 | $9,500 | 5-10 days |
| Environmental Monitoring | $750 | $3,800 | 2-5 days |
| Aerial Imagery | $350 | $1,700 | 1-2 days |
| Construction Monitoring | $400 | $2,200 | 1-3 days per visit |
| Real Estate Photography | $200 | $900 | 1-2 days |
| Roof Inspection | $300 | $1,200 | 1-2 days |
Pricing ranges are based on market data for Deltona-Daytona Beach-Ormond Beach MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Daytona Beach, FL
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Daytona Beach, FL?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Daytona Beach and the surrounding Deltona-Daytona Beach-Ormond Beach MSA area.
Apply to Join