Topographic Data Collection in Farragut, TN
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Knox & the Knoxville, TN MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Farragut, TN
Low End
$1,200
High End
$4,300
Turnaround
3-5 days
Cost ranges are based on market data for Knoxville, TN MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Farragut
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Farragut. Here's what's driving demand:
Farragut is an affluent west Knoxville suburb in Knox County, known for its executive residential neighborhoods and the Turkey Creek retail destination. The town's construction market is driven by the Turkey Creek mixed-use development, which continues to build out retail, restaurant, medical office, and residential components along Kingston Pike. Residential development is primarily infill and custom home building in established neighborhoods, with limited new subdivision development due to the town's built-out character. Commercial development is concentrated along Kingston Pike and the Turkey Creek corridor, with national retail tenants, medical office buildings, and restaurants. The Farragut Business Park attracts office and light industrial tenants. Infrastructure projects include road improvements along Kingston Pike, the Campbell Station Road interchange improvements, and the continued expansion of the Turkey Creek development with mixed-use residential components.
Major Developers Active in the Area:
Tennessee drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Farragut meets all federal and state requirements.
Drone Regulations in Farragut, TN
Airports & LAANC Zones
- TYS — McGhee Tyson Airport (Class C airspace, approximately 5 NM southwest)
- DKX — Knoxville Downtown Island Airport (uncontrolled, approximately 12 NM east)
- OQT — Oak Ridge Airport (uncontrolled, approximately 12 NM northwest)
Restricted Airspace
- Farragut is partially within the McGhee Tyson Class C airspace. The outer ring (10 NM radius, up to 10,000 ft MSL) covers most of Farragut. The surface area (5 NM radius, 2,700 ft MSL to 10,000 ft MSL) may extend into the southwestern portions of Farragut near the Turkey Creek area. LAANC authorization is required for commercial drone operations within the Class C surface area and outer ring. Check FAA UAS Facility Maps for exact boundaries.
- Farragut's position west of Knoxville and north of McGhee Tyson Airport places it in the approach corridor for aircraft landing at TYS. While Part 107 operations below 400 ft AGL are generally clear of these approach corridors, operators should maintain awareness of low-altitude aircraft traffic.
- The Kingston Pike corridor through Farragut is a busy commercial area. While there are no specific airspace restrictions over commercial corridors, operators should be aware of vehicle traffic and pedestrian safety when launching and recovering drones in retail areas.
Local Ordinances
The Town of Farragut does not maintain a dedicated municipal drone ordinance. Commercial operators follow FAA Part 107 rules and Tennessee state law. Commercial takeoff and landing from Farragut town parks should be coordinated with the Farragut Parks and Recreation Department. Founder's Park at Campbell Station and Village Green Park are recreational facilities where drone operations should be coordinated with town staff. The Turkey Creek commercial district is a major retail area where drone inspections of commercial buildings should be coordinated with property management. Operators should be aware that Farragut is within the TYS Class C outer ring, requiring LAANC authorization for commercial flights.
All drone operations in Farragut must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Farragut airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Farragut, TN
How much does a drone topographic data collection cost in Farragut?
Drone topographic data collection projects in Farragut typically range from $1,200 to $4,300 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Farragut, TN
Do I need LAANC authorization to fly a drone in Farragut?
Yes. Most of Farragut falls within the McGhee Tyson Class C outer ring (10 NM radius, up to 10,000 ft MSL). The surface area (5 NM radius) may extend into southwestern portions near Turkey Creek. LAANC authorization is required for commercial drone operations within the Class C. Check the FAA UAS Facility Maps for exact boundaries at your flight location.
Can I fly a drone over the Turkey Creek retail district?
The Turkey Creek retail district is private commercial property. Commercial drone inspections of buildings in Turkey Creek should be coordinated with property management. The area is within the TYS Class C outer ring, so LAANC authorization is required. Be aware of vehicle and pedestrian traffic in the retail area. Turkey Creek is a common location for commercial roof inspections and real estate photography.
How much does an aerial imaging cost for a residential lot in Farragut?
Residential lot topographic data collection in Farragut typically cost $1,200 to $4,300 depending on lot size and terrain. Aerial photography for executive home real estate listings ranges from $180 to $740. Construction monitoring for custom home builds runs $350 to $1,700 per visit.
Can I fly a drone in Founder's Park at Campbell Station?
Commercial drone takeoff and landing from Founder's Park at Campbell Station should be coordinated with the Farragut Parks and Recreation Department. The park is within the TYS Class C outer ring, so LAANC authorization is required. The park is a popular recreational area, so schedule flights during low-traffic periods.
What should I know about aircraft approach corridors over Farragut?
Farragut is north of McGhee Tyson Airport and may be under approach corridors for aircraft landing at TYS. While Part 107 operations below 400 ft AGL are generally clear of these approach corridors at higher altitudes, operators should maintain awareness of low-altitude aircraft traffic. The Class C outer ring requires LAANC authorization, which helps deconflict drone operations with manned aircraft.
All Aerial Imaging Services in Farragut, TN
Compare pricing across all aerial imaging services available in Farragut, Tennessee.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,200 | $4,300 | 3-5 days |
| Drone Inspection | $220 | $1,780 | 1-2 days |
| LiDAR Scanning | $2,000 | $7,900 | 5-7 days |
| Environmental Monitoring | $700 | $2,800 | 2-4 days |
| Aerial Imagery | $170 | $1,080 | 1-2 days |
| Construction Monitoring | $350 | $1,700 | 1-3 days per visit |
| Real Estate Photography | $180 | $740 | 1-2 days |
| Roof Inspection | $250 | $910 | 1-2 days |
Pricing ranges are based on market data for Knoxville, TN MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Farragut, TN
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Farragut, TN?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Farragut and the surrounding Knoxville, TN MSA area.
Apply to Join