Topographic Data Collection in Marietta, GA
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Cobb & the Atlanta-Sandy Springs-Roswell MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Marietta, GA
Low End
$1,400
High End
$5,200
Turnaround
3-7 days
Cost ranges are based on market data for Atlanta-Sandy Springs-Roswell MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Marietta
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Marietta. Here's what's driving demand:
Marietta is a mature Cobb County suburb with active infill and mixed-use development. The Franklin Road corridor is undergoing a multi-year revitalization with new multifamily and commercial projects replacing older apartment complexes. The Marietta Square area has seen new restaurant, retail, and office construction. The Whitlock Avenue corridor has steady residential and medical office development. Industrial development along South Marietta Parkway continues with warehouse and flex space. The Sewell Mill Road area has new townhome communities. Marietta is largely built-out, so most construction is infill, renovation, and redevelopment of older sites.
Major Developers Active in the Area:
Georgia drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Marietta meets all federal and state requirements.
Drone Regulations in Marietta, GA
Airports & LAANC Zones
- RYY — Cobb County International-McCollum Field (Class D airspace, within city limits)
Restricted Airspace
- RYY (McCollum Field) Class D airspace covers the central and northern parts of Marietta. Commercial drone flights within 5 miles require LAANC authorization.
- Dobbins Air Reserve Base (KRBM) is 6 miles southeast with Class D and restricted area R-3007A. Military restricted airspace is active by NOTAM and supersedes civilian drone access.
- Kennesaw Mountain National Battlefield Park is partially within Marietta city limits. NPS drone prohibition applies to takeoff and landing on park grounds.
- Marietta Square and the historic district have no formal drone restrictions, but the area has heavy pedestrian traffic during events and farmers markets.
Local Ordinances
Marietta does not have a city-specific drone ordinance. Commercial drone operators follow Georgia SB 465 and FAA Part 107. Cobb County requires a business license for commercial work. McCollum Field (RYY) Class D airspace covers much of Marietta, requiring LAANC authorization for controlled airspace operations. Kennesaw Mountain National Battlefield Park, partially within Marietta, has NPS drone prohibitions on takeoff and landing. Dobbins Air Reserve Base to the southeast has active military restricted airspace that supersedes civilian drone access by NOTAM.
All drone operations in Marietta must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Marietta airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Marietta, GA
How much does a drone topographic data collection cost in Marietta?
Drone topographic data collection projects in Marietta typically range from $1,400 to $5,200 with 3-7 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Marietta, GA
Can I fly a drone near McCollum Field in Marietta?
McCollum Field (RYY) has Class D airspace covering much of Marietta. Commercial drone flights within the Class D lateral boundary require LAANC authorization through the FAA. You must also coordinate with the RYY air traffic control tower for operations within 5 miles of the airport. Low-altitude flights (under 400 ft AGL) outside the Class D lateral boundary typically do not require LAANC.
Are there drone restrictions at Kennesaw Mountain National Battlefield Park?
Kennesaw Mountain National Battlefield Park is managed by the National Park Service, which prohibits drone takeoff and landing on NPS property. You can fly over the park from private property outside its boundaries, but cannot launch from or land on park grounds. Violations carry federal penalties under 36 CFR 1.5 and 36 CFR 4.20.
How does Dobbins Air Reserve Base affect drone operations in Marietta?
Dobbins Air Reserve Base is 6 miles southeast of Marietta and has Class D airspace plus restricted area R-3007A. When the restricted area is active (published by NOTAM), civilian drone flights are prohibited. Even when inactive, Class D airspace requires LAANC authorization. Always check current NOTAMs before flying in southeast Marietta.
What drone services are most in demand in Marietta?
Franklin Road corridor redevelopment monitoring, multifamily construction documentation, Marietta Square commercial renovation data collection projects, residential real estate photography for the Whitlock corridor, and industrial roof inspections along South Marietta Parkway are the primary demand drivers.
What is the cost of a drone roof inspection in Marietta?
Drone roof inspections in Marietta typically cost $300 to $1,200 depending on roof size, pitch, and complexity. Industrial roof inspections along South Marietta Parkway may run higher due to larger building footprints.
Do I need a business license to operate a commercial drone in Marietta?
Yes. Cobb County requires a business license for commercial operations. You must also hold a valid FAA Part 107 Remote Pilot Certificate. Georgia SB 465 prohibits surveillance of private property without consent and restricts flights over critical infrastructure.
All Aerial Imaging Services in Marietta, GA
Compare pricing across all aerial imaging services available in Marietta, Georgia.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,400 | $5,200 | 3-7 days |
| Drone Inspection | $450 | $2,600 | 1-3 days |
| LiDAR Scanning | $2,300 | $9,000 | 5-10 days |
| Environmental Monitoring | $700 | $3,500 | 2-5 days |
| Aerial Imagery | $350 | $1,500 | 1-2 days |
| Construction Monitoring | $400 | $2,200 | 1-3 days per visit |
| Real Estate Photography | $250 | $950 | 1-2 days |
| Roof Inspection | $300 | $1,200 | 1-2 days |
Pricing ranges are based on market data for Atlanta-Sandy Springs-Roswell MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Marietta, GA
Are You a Drone Operator in Marietta, GA?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Marietta and the surrounding Atlanta-Sandy Springs-Roswell MSA area.
Apply to Join