Topographic Data Collection in Rexburg, ID
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Madison County & the Rexburg area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Rexburg, ID
Low End
$1,050
High End
$3,900
Turnaround
3-5 days
Cost ranges are based on market data for Rexburg. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Rexburg
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Rexburg. Here's what's driving demand:
Rexburg is one of the fastest-growing cities in eastern Idaho, with a population of approximately 40,000 including BYU-Idaho students. Major construction includes the BYU-Idadio campus expansion (new science building and student housing), the Teton Riverfront residential development, and multiple apartment complexes serving the student population. The Idaho Transportation Department is improving US-20 through Rexburg with an $18 million corridor project. Residential permitting exceeded 400 new housing units in 2023-2024, driven by student housing demand and family residential growth.
Major Developers Active in the Area:
Idaho drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Rexburg meets all federal and state requirements.
Drone Regulations in Rexburg, ID
Airports & LAANC Zones
- RXE - Rexburg-Madison County Airport (Class G, general aviation, untowered, 3 miles north)
- IDA - Idaho Falls Regional Airport (Class D, commercial, 30 miles south)
- S66 - Driggs Airport (Class G, general aviation, untowered, 50 miles east)
- U60 - Blackfoot Airport (Class G, general aviation, untowered, 45 miles south)
Restricted Airspace
- Rexburg-Madison County Airport (RXE) is an untowered GA airport with Class G airspace. While LAANC is not required, operators must maintain visual line of sight and yield to manned aircraft. Use CTAF frequency 122.9 to announce intentions.
- Yellowstone National Park is 90 miles northeast. Drone flights are prohibited within all National Park Service-administered lands without a special use permit. The park boundary extends into the nearby Island Park area.
- Caribou-Targhee National Forest surrounds Rexburg to the east and north. Seasonal fire TFRs are common July through October. BLM lands south of Rexburg have seasonal fire restrictions during summer months.
- Rexburg City Code prohibits drone takeoff and landing in city parks (Smith Park, Porter Park, Nature Park) without a Special Use Permit from Rexburg Parks and Recreation.
- Brigham Young University-Idaho campus has drone flight restrictions. Commercial drone operators must coordinate with BYU-Idaho Campus Security before flying over or near campus buildings.
- Teton River corridor and Henrys Fork of the Snake River have seasonal wildlife restrictions. Operators should avoid disturbing trout spawning areas and nesting raptors during spring and fall.
Local Ordinances
Rexburg City Code requires a Special Use Permit for commercial drone operations taking off or landing on city-owned property, including Smith Park, Porter Park, and Nature Park. The permit is processed through Rexburg Parks and Recreation. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Idaho Code section 21-810 preempts Rexburg from regulating drone airspace or flight paths. Brigham Young University-Idaho campus requires coordination with Campus Security for any commercial drone operations over or near campus facilities.
All drone operations in Rexburg must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Rexburg airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Rexburg, ID
How much does a drone topographic data collection cost in Rexburg?
Drone topographic data collection projects in Rexburg typically range from $1,050 to $3,900 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Rexburg, ID
Do I need LAANC authorization to fly a drone in Rexburg?
No. Rexburg-Madison County Airport (RXE) has Class G (uncontrolled) airspace, so LAANC is not required for flights in the immediate Rexburg area. However, if your flight extends into the IDA Class D airspace 30 miles south, you will need LAANC authorization for that zone.
Can I fly a drone near the BYU-Idaho campus?
Commercial drone operators must coordinate with BYU-Idaho Campus Security before flying over or near campus buildings. The university has internal drone flight restrictions for safety and privacy. FAA Part 107 prohibits flights over people not under your control without a waiver.
How far is Rexburg from Yellowstone National Park, and does that affect drone flights?
Yellowstone National Park is 90 miles northeast of Rexburg. Drone flights are prohibited within all National Park Service-administered lands without a special use permit. The nearby Caribou-Targhee National Forest also has seasonal fire TFRs that can affect flight operations.
What construction projects are driving aerial imaging demand in Rexburg?
The BYU-Idaho campus expansion (new science building and student housing), the US-20 corridor improvement project ($18 million), and multiple student apartment complexes are the primary drivers. Residential permitting exceeded 400 new units in 2023-2024.
How much does a drone 3D scanning cost in the Rexburg area?
3D scanning pricing in the Madison County area ranges from $2,700 to $7,000 depending on acreage, point density requirements, and deliverable complexity. Turnaround is generally 5-10 business days. Standard topographic data collection are less expensive at $1,100 to $4,000.
All Aerial Imaging Services in Rexburg, ID
Compare pricing across all aerial imaging services available in Rexburg, Idaho.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,050 | $3,900 | 3-5 days |
| Drone Inspection | $650 | $2,600 | 2-4 days |
| LiDAR Scanning | $2,700 | $7,000 | 5-10 days |
| Environmental Monitoring | $1,400 | $4,600 | 4-7 days |
| Aerial Imagery | $450 | $1,700 | 1-3 days |
| Construction Monitoring | $900 | $3,100 | 2-5 days |
| Real Estate Photography | $250 | $950 | 1-2 days |
| Roof Inspection | $350 | $1,300 | 1-2 days |
Pricing ranges are based on market data for Rexburg. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Rexburg, ID
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Rexburg, ID?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Rexburg and the surrounding Rexburg area.
Apply to Join