Drone Inspection in Stevens Point, WI
Detailed aerial inspections of roofs, bridges, towers, and infrastructure. High-resolution imagery and thermal data for condition assessments and maintenance planning.
Serving Portage County & the Stevens Point, WI Micropolitan Statistical Area (Portage County, Wisconsin) area
Request a Free Quote
Get Matched With a Local Operator
Drone Inspection Pricing in Stevens Point, WI
Low End
$225
High End
$900
Turnaround
1-3 days
Cost ranges are based on market data for Stevens Point, WI Micropolitan Statistical Area (Portage County, Wisconsin). Actual pricing depends on site size, complexity, and deliverables.
Common Drone Inspection Applications in Stevens Point
- Roof condition assessments
- Bridge and infrastructure inspections
- Cell tower and utility pole inspections
- Façade and wall condition aerial imaging flights
Local Drone Regulations
Drone inspections in Stevens Point require knowledge of local airspace and regulations:
Local Drone Ordinances:
Stevens Point operates under Wisconsin state drone law (WI Statutes Chapter 114, including 114.05 UAS regulations and 942.10 privacy provisions) with local regulations limited by state preemption of flight paths and navigable airspace under Wisconsin Act 342. The City of Stevens Point requires permits for commercial drone takeoff and landing on city-owned property, including parks managed by the Stevens Point Parks, Recreation and Forestry Department. The Stevens Point Planning Department frequently requires aerial imaging documentation for site plans along the Business 51 corridor and the University of Wisconsin-Stevens Point campus area. Stevens Point Municipal Airport (STE) is uncontrolled, but the proximity to Central Wisconsin Airport (CWA) Class D airspace means operators in the Plover area should verify boundaries. The City of Stevens Point does not have a separate municipal drone ordinance beyond state law.
Restricted Airspace in Stevens Point:
- Central Wisconsin Airport (CWA) Class D airspace extends approximately 4.5 NM from the airport and reaches up to 3,000 feet MSL. While CWA is approximately 10 NM southwest of Stevens Point, commercial drone operators in the Plover and southwestern Portage County area should check Class D boundaries using the FAA B4UFLY app or LAANC provider apps. LAANC authorization is available for the CWA Class D area.
- The Wisconsin River corridor through Stevens Point has infrastructure including dams and water management facilities, including the Stevens Point Dam. Commercial drone operators should exercise caution near these facilities under critical infrastructure guidelines.
- The George W. Mead Wildlife Area (approximately 15 NM west) is a major state wildlife area. Commercial drone operations within the wildlife area require special use permits from the Wisconsin Department of Natural Resources. The area contains sensitive wetland and grassland ecosystems with environmental protection designations.
- The Tomorrow River State Trail and Ice Age Trail corridors through Portage County have environmental protection guidelines. Commercial drone operations should avoid disturbing trail corridors during peak recreational use periods.
- Fort McCoy Army Installation (approximately 50 NM southwest) has restricted airspace R-6901 and R-6902 for military training. While distant from Stevens Point, operators conducting long-range missions should check for active MOAs and restricted areas in central Wisconsin.
Wisconsin drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Stevens Point meets all federal and state requirements.
Drone Regulations in Stevens Point, WI
Airports & LAANC Zones
- STE — Stevens Point Municipal Airport (uncontrolled airspace, primary general aviation airport for Portage County — corporate and recreational aviation)
- CWA — Central Wisconsin Airport (Class D airspace, approximately 10 NM southwest in Mosinee — regional commercial airport serving central Wisconsin)
- AUW — Wausau Downtown Airport (uncontrolled airspace, approximately 30 NM north, general aviation facility)
- ISW — Alexander Field (uncontrolled airspace, approximately 25 NNW in Wisconsin Rapids, general aviation)
Restricted Airspace
- Central Wisconsin Airport (CWA) Class D airspace extends approximately 4.5 NM from the airport and reaches up to 3,000 feet MSL. While CWA is approximately 10 NM southwest of Stevens Point, commercial drone operators in the Plover and southwestern Portage County area should check Class D boundaries using the FAA B4UFLY app or LAANC provider apps. LAANC authorization is available for the CWA Class D area.
- The Wisconsin River corridor through Stevens Point has infrastructure including dams and water management facilities, including the Stevens Point Dam. Commercial drone operators should exercise caution near these facilities under critical infrastructure guidelines.
- The George W. Mead Wildlife Area (approximately 15 NM west) is a major state wildlife area. Commercial drone operations within the wildlife area require special use permits from the Wisconsin Department of Natural Resources. The area contains sensitive wetland and grassland ecosystems with environmental protection designations.
- The Tomorrow River State Trail and Ice Age Trail corridors through Portage County have environmental protection guidelines. Commercial drone operations should avoid disturbing trail corridors during peak recreational use periods.
- Fort McCoy Army Installation (approximately 50 NM southwest) has restricted airspace R-6901 and R-6902 for military training. While distant from Stevens Point, operators conducting long-range missions should check for active MOAs and restricted areas in central Wisconsin.
Local Ordinances
Stevens Point operates under Wisconsin state drone law (WI Statutes Chapter 114, including 114.05 UAS regulations and 942.10 privacy provisions) with local regulations limited by state preemption of flight paths and navigable airspace under Wisconsin Act 342. The City of Stevens Point requires permits for commercial drone takeoff and landing on city-owned property, including parks managed by the Stevens Point Parks, Recreation and Forestry Department. The Stevens Point Planning Department frequently requires aerial imaging documentation for site plans along the Business 51 corridor and the University of Wisconsin-Stevens Point campus area. Stevens Point Municipal Airport (STE) is uncontrolled, but the proximity to Central Wisconsin Airport (CWA) Class D airspace means operators in the Plover area should verify boundaries. The City of Stevens Point does not have a separate municipal drone ordinance beyond state law.
All drone operations in Stevens Point must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Stevens Point airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Drone Inspection FAQ — Stevens Point, WI
What can drone inspections detect in Stevens Point?
Drone inspections capture high-resolution imagery and thermal data to identify cracks, leaks, corrosion, vegetation encroachment, structural damage, and maintenance needs on roofs, bridges, towers, and infrastructure in Stevens Point.
How long does a drone inspection take?
Most drone inspections are completed in 1-2 hours on-site, depending on the size and complexity of the structure. Deliverables are typically ready within 1-2 business days.
Are drone inspections safe?
Yes. Drone inspections eliminate the need for scaffolding, ladders, or lift equipment, keeping inspectors safely on the ground while capturing detailed close-up imagery of hard-to-reach areas.
Drone Regulations FAQ — Stevens Point, WI
Do I need LAANC authorization to fly a drone in Stevens Point?
Stevens Point Municipal Airport (STE) is uncontrolled with no Class D or Class C airspace, so most of Stevens Point does not require LAANC authorization. However, Central Wisconsin Airport (CWA) approximately 10 NM southwest has Class D airspace. Operators in the Plover area should check boundaries. Use the FAA B4UFLY app to verify airspace before flying.
What is the cost of an aerial imaging for a construction site in Stevens Point?
Topographic drone data collection in Stevens Point typically ranges from $800 to $2,400 depending on acreage and terrain complexity. Construction monitoring visits cost $225 to $900 per session. LiDAR scanning runs $1,400 to $4,500. The UWSP campus expansion, Sentry Insurance campus development, and I-39 industrial corridor construction create demand for aerial mapping services.
Can I fly a drone over the George W. Mead Wildlife Area near Stevens Point?
The George W. Mead Wildlife Area, approximately 15 NM west of Stevens Point, is a major state wildlife area. Commercial drone operations within the wildlife area require special use permits from the Wisconsin DNR. The area contains sensitive wetland and grassland ecosystems with environmental protection designations. Operators should obtain DNR permits before conducting any aerial work within the wildlife area boundaries.
What construction projects are driving aerial imaging demand in Stevens Point?
Major projects include the UWSP campus expansion and modernization, Business 51 corridor redevelopment, Aspirus Stevens Point Hospital expansion, Sentry Insurance corporate campus growth, and residential construction in the Plover area. Portage County saw building permit values exceeding $220 million in 2024.
Are there airspace restrictions near Central Wisconsin Airport that affect Stevens Point?
Central Wisconsin Airport (CWA) Class D airspace extends approximately 4.5 NM from the airport, approximately 10 NM southwest of Stevens Point. Commercial drone operators in the Plover area and southwestern Portage County should verify their position relative to the CWA Class D boundary before flying and obtain LAANC authorization if within the controlled airspace.
How does UW-Stevens Point affect construction and aerial imaging demand?
The University of Wisconsin-Stevens Point drives ongoing campus construction including residence halls, academic buildings, and athletic facilities. These projects require site data collection projects, construction progress monitoring, and as-built documentation. The university's growth, combined with Sentry Insurance campus expansion and healthcare facility development, creates consistent demand for aerial mapping services in the Stevens Point area.
All Aerial Imaging Services in Stevens Point, WI
Compare pricing across all aerial imaging services available in Stevens Point, Wisconsin.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection | $800 | $2,400 | 3-5 days |
| Drone Inspection ← you are here | $225 | $900 | 1-3 days |
| LiDAR Scanning | $1,400 | $4,500 | 4-7 days |
| Environmental Monitoring | $350 | $1,450 | 2-4 days |
| Aerial Imagery | $200 | $800 | 1-2 days |
| Construction Monitoring | $225 | $900 | 1-3 days per visit |
| Real Estate Photography | $125 | $400 | 1-2 days |
| Roof Inspection | $175 | $500 | 1-2 days |
Pricing ranges are based on market data for Stevens Point, WI Micropolitan Statistical Area (Portage County, Wisconsin). Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Stevens Point, WI
Drone Inspection in Nearby Cities
Are You a Drone Operator in Stevens Point, WI?
Join our network of FAA-certified operators. Get matched with drone inspection projects in Stevens Point and the surrounding Stevens Point, WI Micropolitan Statistical Area (Portage County, Wisconsin) area.
Apply to Join