LiDAR Scanning in Yakima, WA
Survey-grade LiDAR scanning with point cloud deliverables in LAS/LAZ format. Penetrate vegetation for accurate terrain models in forestry, mining, and utility corridors.
Serving Yakima County & the Yakima area
Request a Free Quote
Get Matched With a Local Operator
LiDAR Scanning Pricing in Yakima, WA
Low End
$2,200
High End
$6,800
Turnaround
5-10 days
Cost ranges are based on market data for Yakima. Actual pricing depends on site size, complexity, and deliverables.
Common LiDAR Scanning Applications in Yakima
- Vegetation penetration for terrain models
- Forestry and biomass estimation
- Utility corridor mapping
- Mining and quarry volume data collection projects
Terrain & Airspace Considerations
3D scanning in Yakima requires airspace awareness alongside active project demand:
Yakima is experiencing growth driven by agricultural processing expansion, healthcare facility construction, and downtown revitalization. Major projects include the Virginia Mason Memorial Hospital expansion, the Yakima Convention Center renovation, and residential development in the Terrace Heights and West Valley areas. The Port of Yakima is developing industrial sites for food processing tenants. The Yakima Air Terminal terminal renovation and runway improvement project supports regional connectivity. Downtown revitalization along Yakima Avenue includes mixed-use redevelopment of historic buildings. The I-82 and US-12 interchange improvements are the largest infrastructure projects.
Restricted Airspace in Yakima:
- YKM Class D airspace extends 4 nautical miles from Yakima Air Terminal, surface to 2,500 ft AGL. Southern Yakima falls within this zone requiring LAANC authorization for commercial drone flights.
- Yakima Training Center military airspace is 25 miles south. The YTC has extensive military operations areas (MOAs) and restricted airspace (R-5701) used for artillery, armored vehicle, and aviation training. Check NOTAMs before flying south of Yakima.
- The Naches River and Yakima River create over-water flight considerations. Drone flights over the rivers must maintain visual line of sight. The river corridors are used for irrigation and recreation.
- Yakima Firing Range is 10 miles southwest. Check FAA charts for any temporary restrictions related to military training activities at the range.
- Agricultural lands dominate the Yakima Valley. The area is one of the largest fruit-producing regions in the US, known for apples, cherries, pears, and hops. Commercial drone flights over active orchards and hop yards should coordinate with aerial applicators during spraying season (March through September). Heavy pesticide and fungicide application creates frequent low-altitude agricultural aircraft traffic.
Washington drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Yakima meets all federal and state requirements.
Drone Regulations in Yakima, WA
Airports & LAANC Zones
- YKM - Yakima Air Terminal/McAllister Field (Class D, towered, 3 miles south, commercial + general aviation, Alaska Airlines service)
- 4S6 - Bumping Lake Airport (Class G, untowered, 40 miles northwest, recreational GA)
Restricted Airspace
- YKM Class D airspace extends 4 nautical miles from Yakima Air Terminal, surface to 2,500 ft AGL. Southern Yakima falls within this zone requiring LAANC authorization for commercial drone flights.
- Yakima Training Center military airspace is 25 miles south. The YTC has extensive military operations areas (MOAs) and restricted airspace (R-5701) used for artillery, armored vehicle, and aviation training. Check NOTAMs before flying south of Yakima.
- The Naches River and Yakima River create over-water flight considerations. Drone flights over the rivers must maintain visual line of sight. The river corridors are used for irrigation and recreation.
- Yakima Firing Range is 10 miles southwest. Check FAA charts for any temporary restrictions related to military training activities at the range.
- Agricultural lands dominate the Yakima Valley. The area is one of the largest fruit-producing regions in the US, known for apples, cherries, pears, and hops. Commercial drone flights over active orchards and hop yards should coordinate with aerial applicators during spraying season (March through September). Heavy pesticide and fungicide application creates frequent low-altitude agricultural aircraft traffic.
Local Ordinances
Yakima requires a permit for commercial drone takeoff and landing on city-owned property including parks, sports complexes, and the Yakima Greenway. Contact the Parks and Recreation Department for filming permits. Washington ESSB 6001 governs law enforcement drone use. Washington State Parks (WAC 352-32) prohibit drone takeoff and landing without a permit. The Yakima Training Center to the south has extensive military restricted airspace (R-5701) that operators must check on FAA charts. YKM Class D airspace covers southern Yakima requiring LAANC authorization. Agricultural spraying activity in the Yakima Valley is among the heaviest in Washington state during growing season.
All drone operations in Yakima must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Yakima airports. Our network operators handle all permitting and airspace authorizations as part of their service.
LiDAR Scanning FAQ — Yakima, WA
What is LiDAR scanning and how is it used in Yakima?
LiDAR (Light Detection and Ranging) uses laser pulses to create precise 3D point clouds of terrain and structures. In Yakima, it is used for aerial imaging vegetated areas, utility corridors, mining sites, and forestry where photogrammetry cannot penetrate canopy.
What deliverables does LiDAR produce?
LiDAR scanning delivers classified point clouds in LAS/LAZ format, digital elevation models (DEM), digital surface models (DSM), and cross-section profiles. Data is geo-referenced and compatible with all major GIS and CAD platforms.
How accurate is drone LiDAR?
Drone-mounted LiDAR typically achieves 1-3 cm horizontal accuracy and 2-5 cm vertical accuracy with proper ground control. RTK-corrected systems can deliver sub-centimeter precision for survey-grade applications.
Drone Regulations FAQ — Yakima, WA
Do I need LAANC authorization to fly a drone in Yakima?
Southern Yakima falls within the YKM Class D airspace from Yakima Air Terminal, requiring LAANC authorization. Northern and central Yakima are primarily in uncontrolled Class G airspace. Check the FAA UAS Facility Map for your specific flight location.
What is driving the construction boom in Yakima?
Virginia Mason Memorial Hospital expansion, Port of Yakima industrial development for food processing tenants, downtown Yakima Avenue revitalization, residential growth in Terrace Heights and West Valley, and the I-82/US-12 interchange improvements are the major projects driving construction demand.
Are there military airspace restrictions near Yakima?
The Yakima Training Center is 25 miles south with extensive military operations areas and restricted airspace (R-5701) used for artillery, armored vehicle, and aviation training. The Yakima Firing Range is 10 miles southwest. Check NOTAMs before flying south of Yakima as military training can create temporary flight restrictions.
Can I fly a drone over the orchards in the Yakima Valley?
The Yakima Valley is one of the heaviest agricultural spraying areas in Washington. Commercial drone flights over active orchards and hop yards should coordinate with aerial applicators during spraying season (March through September). Heavy pesticide and fungicide application creates frequent low-altitude agricultural aircraft traffic. Always check for crop-dusting activity before flying near agricultural areas.
How much does an aerial imaging cost in Yakima?
Topographic data collection projects in Yakima range from $950 to $3,800. LiDAR scanning costs $2,200 to $6,800. Construction monitoring runs $800 to $3,100. Pricing reflects the central Washington market, which is moderate but steady due to agricultural processing and healthcare construction.
All Aerial Imaging Services in Yakima, WA
Compare pricing across all aerial imaging services available in Yakima, Washington.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection | $950 | $3,800 | 3-6 days |
| Drone Inspection | $650 | $2,500 | 2-4 days |
| LiDAR Scanning ← you are here | $2,200 | $6,800 | 5-10 days |
| Environmental Monitoring | $1,100 | $4,200 | 4-7 days |
| Aerial Imagery | $380 | $1,450 | 1-3 days |
| Construction Monitoring | $800 | $3,100 | 2-5 days |
| Real Estate Photography | $270 | $1,050 | 1-2 days |
| Roof Inspection | $300 | $1,100 | 1-2 days |
Pricing ranges are based on market data for Yakima. Actual costs depend on project scope, site conditions, and required deliverables.
Are You a Drone Operator in Yakima, WA?
Join our network of FAA-certified operators. Get matched with lidar scanning projects in Yakima and the surrounding Yakima area.
Apply to Join