Topographic Data Collection in Blackfoot, ID
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Bingham County & the Pocatello-Blackfoot area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Blackfoot, ID
Low End
$950
High End
$3,500
Turnaround
3-5 days
Cost ranges are based on market data for Pocatello-Blackfoot. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Blackfoot
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Blackfoot. Here's what's driving demand:
Blackfoot serves as the Bingham County seat and a regional agricultural processing hub, home to the Idaho Potato Museum and major potato processing facilities. Major construction includes the Gem State Processing facility expansion, the Blackfoot School District bond projects (new high school wing and intermediate school upgrades), and residential development along the Snake River bench. The Idaho Transportation Department is improving US-91 through Blackfoot with a $12 million corridor project. Residential permitting reached approximately 120 new housing units in 2023-2024.
Major Developers Active in the Area:
Idaho drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Blackfoot meets all federal and state requirements.
Drone Regulations in Blackfoot, ID
Airports & LAANC Zones
- U60 - Blackfoot Airport (Class G, general aviation, untowered, within city limits)
- PIH - Pocatello Regional Airport (Class D, commercial, 25 miles south)
- IDA - Idaho Falls Regional Airport (Class D, commercial, 25 miles north)
- S66 - McCammon Airport (Class G, general aviation, untowered, 45 miles south)
Restricted Airspace
- Idaho National Laboratory (INL) restricted airspace located 25 miles northwest. Prohibited Area P-462 and Restricted Areas R-4601, R-4602, R-4603 are active for nuclear research facility security. No drone flights permitted within these zones under any circumstances.
- Blackfoot Airport (U60) is an untowered GA airport with Class G airspace. While LAANC is not required, operators must maintain visual line of sight and yield to manned aircraft. Use CTAF frequency 122.8 to announce intentions.
- Fort Hall Indian Reservation borders Blackfoot to the west. Tribal lands require a permit from the Shoshone-Bannock Tribes for commercial drone operations. Unauthorized flights over reservation lands may result in tribal law enforcement action.
- Blackfoot City Code prohibits drone takeoff and landing in city parks (Jensen Grove Park, Riviera Golf Course area, Lion's Park) without a Special Use Permit from Blackfoot Parks and Recreation.
- Snake River corridor and Jensen Grove reservoir have seasonal wildlife restrictions. Operators should avoid disturbing waterfowl during spring migration and nesting seasons.
- Bingham County has seasonal fire restrictions on agricultural and BLM lands. Summer TFRs for wildfire operations and agricultural burning are common July through October.
Local Ordinances
Blackfoot City Code requires a Special Use Permit for commercial drone operations taking off or landing on city-owned property, including Jensen Grove Park and Lion's Park. The permit is processed through Blackfoot Parks and Recreation. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Idaho Code section 21-810 preempts Blackfoot from regulating drone airspace or flight paths. Operators should be aware that Fort Hall Indian Reservation borders the city to the west and requires tribal permits for drone operations over reservation lands.
All drone operations in Blackfoot must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Blackfoot airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Blackfoot, ID
How much does a drone topographic data collection cost in Blackfoot?
Drone topographic data collection projects in Blackfoot typically range from $950 to $3,500 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Blackfoot, ID
How does the Idaho National Laboratory affect drone flights near Blackfoot?
The INL restricted airspace (Prohibited Area P-462, Restricted Areas R-4601-4603) is located 25 miles northwest of Blackfoot. No drone flights are permitted within these zones under any circumstances. The prohibited area is active at all times for nuclear research facility security.
Do I need LAANC authorization to fly a drone in Blackfoot?
Blackfoot Airport (U60) has Class G (uncontrolled) airspace, so LAANC is not required for flights near the airport. However, if your flight extends into the PIH Class D airspace 25 miles south or IDA Class D 25 miles north, you will need LAANC authorization for those zones.
Can I fly a drone over Fort Hall Indian Reservation near Blackfoot?
Not without a tribal permit. Fort Hall Indian Reservation borders Blackfoot to the west. The Shoshone-Bannock Tribes require a permit for commercial drone operations over reservation lands. Unauthorized flights may result in tribal law enforcement action.
What construction projects are driving aerial imaging demand in Blackfoot?
The Gem State Processing facility expansion, Blackfoot School District bond projects, and the US-91 corridor improvement project ($12 million) are the primary drivers. Agricultural processing facility inspections create recurring commercial drone demand.
How much does a drone 3D scanning cost in the Blackfoot area?
3D scanning pricing in the Bingham County area ranges from $2,300 to $6,000 depending on acreage, point density requirements, and deliverable complexity. Turnaround is generally 5-10 business days. Standard topographic data collection are less expensive at $950 to $3,500.
All Aerial Imaging Services in Blackfoot, ID
Compare pricing across all aerial imaging services available in Blackfoot, Idaho.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $950 | $3,500 | 3-5 days |
| Drone Inspection | $600 | $2,300 | 2-4 days |
| LiDAR Scanning | $2,300 | $6,000 | 5-10 days |
| Environmental Monitoring | $1,200 | $4,200 | 4-7 days |
| Aerial Imagery | $350 | $1,500 | 1-3 days |
| Construction Monitoring | $750 | $2,800 | 2-5 days |
| Real Estate Photography | $200 | $800 | 1-2 days |
| Roof Inspection | $250 | $1,100 | 1-2 days |
Pricing ranges are based on market data for Pocatello-Blackfoot. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Blackfoot, ID
Are You a Drone Operator in Blackfoot, ID?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Blackfoot and the surrounding Pocatello-Blackfoot area.
Apply to Join