Topographic Data Collection in Chubbuck, ID
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Bannock County & the Pocatello area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Chubbuck, ID
Low End
$950
High End
$3,600
Turnaround
3-5 days
Cost ranges are based on market data for Pocatello. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Chubbuck
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Chubbuck. Here's what's driving demand:
Chubbuck is the primary commercial and residential expansion area for the Pocatello metro, with growth driven by Idaho State University spillover and regional retail development. Major construction includes the Hoku Center industrial park expansion, the Chubbuck Town Center retail development along Yellowstone Avenue, and multiple residential subdivisions on the eastern bench. The Idaho Transportation Department is improving US-91 through Chubbuck with a $15 million corridor project. Residential permitting reached approximately 200 new housing units in 2023-2024.
Major Developers Active in the Area:
Idaho drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Chubbuck meets all federal and state requirements.
Drone Regulations in Chubbuck, ID
Airports & LAANC Zones
- PIH - Pocatello Regional Airport (Class D, commercial + general aviation, towered, 5 miles southwest)
- IDA - Idaho Falls Regional Airport (Class D, commercial, 50 miles north)
- U60 - Blackfoot Airport (Class G, general aviation, untowered, 20 miles north)
- S66 - McCammon Airport (Class G, general aviation, untowered, 25 miles southwest)
Restricted Airspace
- Pocatello Regional Airport (PIH) Class D airspace extends 4 nautical miles, covering the southwestern Chubbuck area. LAANC authorization required for commercial drone flights within this controlled airspace ring.
- Idaho National Laboratory (INL) restricted airspace located 50 miles northwest. Prohibited Area P-462 and Restricted Areas R-4601-4603 are active for nuclear research facility security. No drone flights permitted within these zones.
- Fort Hall Indian Reservation borders Chubbuck to the north and west. Tribal lands require a permit from the Shoshone-Bannock Tribes for commercial drone operations. Unauthorized flights over reservation lands may result in tribal law enforcement action.
- Chubbuck City Code prohibits drone takeoff and landing in city parks (Cotant Park, Chubbuck Park, Stuart Park) without a Special Use Permit from Chubbuck Parks and Recreation.
- Bannock County has seasonal fire restrictions on BLM lands east of Chubbuck. Summer TFRs for wildfire operations are common July through September.
- Pocatello Range and Portneuf River corridor have seasonal wildlife restrictions. Operators should avoid disturbing elk and deer populations during winter months when wildlife is stressed.
Local Ordinances
Chubbuck City Code requires a Special Use Permit for commercial drone operations taking off or landing on city-owned property, including Cotant Park, Chubbuck Park, and Stuart Park. The permit is processed through Chubbuck Parks and Recreation. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Idaho Code section 21-810 preempts Chubbuck from regulating drone airspace or flight paths. Operators should be aware that Fort Hall Indian Reservation borders the city to the north and requires tribal permits for drone operations over reservation lands.
All drone operations in Chubbuck must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Chubbuck airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Chubbuck, ID
How much does a drone topographic data collection cost in Chubbuck?
Drone topographic data collection projects in Chubbuck typically range from $950 to $3,600 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Chubbuck, ID
Do I need LAANC authorization to fly a drone in Chubbuck?
Yes. Southwestern Chubbuck falls within the Pocatello Regional Airport (PIH) Class D airspace 4 NM ring. Flights in controlled airspace require FAA LAANC authorization. Use the Aloft or DroneUp LAANC apps to request instant approval for altitudes up to 400 ft AGL.
Can I fly a drone over Fort Hall Indian Reservation near Chubbuck?
Not without a tribal permit. Fort Hall Indian Reservation borders Chubbuck to the north and west. The Shoshone-Bannock Tribes require a permit for commercial drone operations over reservation lands. Unauthorized flights may result in tribal law enforcement action.
Can I fly a drone over Chubbuck city parks?
Not without a permit. Chubbuck City Code prohibits drone takeoff and landing from city parks, including Cotant Park, Chubbuck Park, and Stuart Park, without a Special Use Permit from Chubbuck Parks and Recreation.
What construction projects are driving aerial imaging demand in Chubbuck?
The Hoku Center industrial park expansion, Chubbuck Town Center retail development, and the US-91 corridor improvement project ($15 million) are the primary drivers. Residential permitting reached approximately 200 new units in 2023-2024.
How much does a drone 3D scanning cost in the Chubbuck area?
3D scanning pricing in the Pocatello metro ranges from $2,500 to $6,500 depending on acreage, point density requirements, and deliverable complexity. Turnaround is generally 5-10 business days. Standard topographic data collection are less expensive at $1,000 to $3,800.
All Aerial Imaging Services in Chubbuck, ID
Compare pricing across all aerial imaging services available in Chubbuck, Idaho.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $950 | $3,600 | 3-5 days |
| Drone Inspection | $650 | $2,500 | 2-4 days |
| LiDAR Scanning | $2,400 | $6,300 | 5-10 days |
| Environmental Monitoring | $1,300 | $4,500 | 4-7 days |
| Aerial Imagery | $400 | $1,600 | 1-3 days |
| Construction Monitoring | $800 | $3,000 | 2-5 days |
| Real Estate Photography | $200 | $900 | 1-2 days |
| Roof Inspection | $300 | $1,200 | 1-2 days |
Pricing ranges are based on market data for Pocatello. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Chubbuck, ID
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Chubbuck, ID?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Chubbuck and the surrounding Pocatello area.
Apply to Join