Aerial Imaging Services in Bountiful, UT
East bench Davis County suburb at 4,600 feet with Wasatch Mountain backdrop and hillside homes
With about 44,081 people in Davis County, Bountiful is a community in the Salt Lake City Metropolitan Area of Utah. Bountiful is an established east bench suburb with hillside residential development, downtown renovation, and hospital expansion. The bench location creates hillside construction data collection demand, with Class B airspace covering the city.
Serving Davis County & the Salt Lake City Metropolitan Area area
Request a Free Quote
Find a Davis County Drone Pilot
Aerial Imaging Services Available in Bountiful, UT
Bountiful is an established east bench suburb with hillside residential development, downtown renovation, and hospital expansion. The bench location creates hillside construction data collection demand, with Class B airspace covering the city.
Utah Aerial Imaging Cost Guide
Pricing below reflects the Salt Lake City Metropolitan Area market. Site size, terrain, and the deliverables you need move the final number up or down.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,675 | $7,350 |
| Drone Inspection | $550 | $3,200 |
| LiDAR Scanning | $2,800 | $13,000 |
| Environmental Monitoring | $1,400 | $6,450 |
| Aerial Imagery | $350 | $2,200 |
| Construction Monitoring | $750 | $4,150 |
| Real Estate Photography | $300 | $1,800 |
| Roof Inspection | $350 | $1,800 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Bountiful? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Airspace & Flying Rules in Bountiful, UT
FAA Part 107 Requirements
Commercial flights over Bountiful fall under FAA Part 107: the pilot must hold a current Remote Pilot Certificate. Network operators are checked before matching.
State Drone Laws
Drone rules in Bountiful layer two ways: Bountiful follows FAA Part 107 regulations. plus Utah statewide UAS law (SB 167 (2019), SB 210 (2021), Utah Code 72-18) governing commercial flights. Full Utah drone law →
Local Ordinances
Bountiful follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace.
Restricted Airspace
- Salt Lake City International Airport Class B airspace
- Wasatch Mountain terrain to the east
Airports in the area: Salt Lake City International Airport (SLC)
Aerial Imaging Solutions for Bountiful's Development Pipeline
Bountiful is an established Davis County suburb on the east bench of the Salt Lake Valley. Construction is driven by residential renovation and infill development, the Bountiful City Center renovation, and healthcare facilities at Lakeview Hospital. The city has ongoing commercial development along 500 South and Main Street. The bench location creates hillside residential construction demand.
Active Developers in the Area:
- Bountiful City Center — Downtown renovation and commercial corridor improvements
- Lakeview Hospital — Hospital expansion and medical office construction
- Residential developers — Hillside infill construction and renovation projects
Why Developers in Bountiful Use Aerius View
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Bountiful
Local crews covering Bountiful and 4 surrounding cities, already current on Utah airspace and LAANC workflows.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
A local operator contacts you within 2 business days — typical for Salt Lake City Metropolitan Area jobs.
Aerial Data Professionals in Bountiful, UT
FAA-certified, insured drone operators serving your area. Request a quote and we'll connect you with the right expert.
Ian Jack
Alpine Reality Capture
1 year experience
Services
Equipment
Service Area
Salt Lake City Metropolitan Area
Contact the professional through the form above. No phone or email is listed, all quotes go through AeriusView.
Your Project Deliverables Explained
Every deliverable below ships with your Bountiful project, formatted for the construction and engineering platforms used throughout the Salt Lake City Metropolitan Area. Projects like those delivered for Bountiful City Center across Davis County need data that drops straight into their workflow.
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Coordinate systems matched to your project datum — the Utah State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Bountiful project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. Bountiful follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Davis County bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Bountiful requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Bountiful construction sites, including flight plans that avoid worker areas and equipment zones. Bountiful follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace.
Frequently Asked Questions — Bountiful Aerial Imaging
What makes Bountiful unique for aerial imaging?
Bountiful is an established east bench suburb with hillside residential development requiring specialized topographic data collection. The city has a mix of older established neighborhoods and newer bench construction. The Lakeview Hospital expansion creates healthcare facility data collection demand.
Can I fly a drone in the foothills east of Bountiful?
The foothills east of Bountiful transition into Wasatch Mountain areas. Check if the area is within US Forest Service jurisdiction, which would require a special use permit for commercial flights. The terrain creates challenging wind conditions, especially in afternoon.
What drone services are most needed in Bountiful?
Residential development data collection and construction monitoring are primary demands. Commercial corridor development creates steady data collection needs. Infrastructure projects including road improvements and utility upgrades provide ongoing aerial documentation opportunities.
Is Bountiful in controlled airspace?
Yes, Bountiful is within the Salt Lake City International Airport Class B airspace. Drone operators need LAANC authorization for all flights. Check the LAANC grid for authorization levels in your specific area.
How does Bountiful elevation affect drone flying?
Bountiful sits at approximately 4,300-4,700 feet elevation in the Salt Lake valley. The elevation reduces drone performance compared to sea level. Summer temperatures above 95 degrees compound the density altitude effect. Plan flights for morning calm conditions when possible.
Does Bountiful have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths, preempting local municipalities. Bountiful follows FAA Part 107 regulations without additional local drone-specific ordinances.
Aerial Imaging Terms for Bountiful Projects
Understand what Bountiful drone operators mean when they quote orthomosaics, point clouds, and more. Most Bountiful projects in our cost table start around $300.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Volumetrics
Cut/fill and stockpile volume calculations derived from terrain models.
Thermal Imaging
Infrared capture that reveals heat signatures for inspections.
Multispectral
Band-specific imagery used for vegetation and crop analysis.
Are You a Drone Operator in Bountiful?
Construction and real-estate demand in Bountiful grows every quarter. Get pre-qualified leads in your service area — first one free.
Ready to Start Your Project in Bountiful, UT?
Free matching with FAA-verified pilots across Davis County and the Salt Lake City Metropolitan Area. Projects in Davis County start around $300.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.