Aerial Imaging Services in Cedar City, UT
High desert plateau at 5,800 feet with Markagunt Plateau backdrop and Southern Utah University
Located in Iron County with a population of 37,360, Cedar City sits within the Cedar City Micropolitan Area. Cedar City is a regional hub for southwestern Utah. Construction is driven by Southern Utah University campus expansion, the Iron County School District, healthcare facilities at Cedar City Hospital, and residential development. The city serves as a gateway to Brian Head ski resort and Cedar Breaks National Monument, creating tourism infrastructure demand. The city has a growing manufacturing and industrial sector in the Cedar City Industrial Park.
Serving Iron County & the Cedar City Micropolitan Area area
Request a Free Quote
Get Matched With a Local Drone Operator
Aerial Data Services for Cedar City Projects
Cedar City is a regional hub for southwestern Utah at 5,800 feet elevation. Southern Utah University expansion, hospital construction, and industrial park development drive construction, with the high elevation and proximity to national monuments creating unique operational constraints.
Aerial Imaging for Cedar City's Construction Market
Cedar City is a regional hub for southwestern Utah. Construction is driven by Southern Utah University campus expansion, the Iron County School District, healthcare facilities at Cedar City Hospital, and residential development. The city serves as a gateway to Brian Head ski resort and Cedar Breaks National Monument, creating tourism infrastructure demand. The city has a growing manufacturing and industrial sector in the Cedar City Industrial Park.
Active Developers in the Area:
- Southern Utah University — Campus building construction, student housing, and academic facility expansion
- Cedar City Hospital — Hospital expansion and medical office construction
- Cedar City Industrial Park — Manufacturing and industrial facility construction
Typical Project Costs in Utah
What Cedar City projects usually cost, based on current Cedar City Micropolitan Area market data. Exact pricing depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,350 | $6,250 |
| Drone Inspection | $475 | $2,650 |
| LiDAR Scanning | $2,175 | $10,350 |
| Environmental Monitoring | $1,125 | $5,150 |
| Aerial Imagery | $275 | $1,700 |
| Construction Monitoring | $625 | $3,050 |
| Real Estate Photography | $250 | $1,150 |
| Roof Inspection | $275 | $1,400 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Cedar City? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Local Airspace & Regulations in Cedar City, UT
FAA Part 107 Requirements
Part 107 is the federal baseline for paid drone work in Cedar City. Each operator in the network holds an active Remote Pilot Certificate, verified at onboarding.
State Drone Laws
Cedar City sits under Utah's statewide UAS framework (SB 167 (2019), SB 210 (2021), Utah Code 72-18); local permitting in Iron County is what varies site to site. Cedar City follows FAA Part 107 regulations. Full Utah drone law →
Local Ordinances
Cedar City follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The Dixie National Forest to the north and east requires US Forest Service permits for commercial flights. Zion National Park is to the south but distant enough that most Cedar City operations are unaffected.
Restricted Airspace
- Class D airspace around Cedar City Regional Airport (CDC)
- Dixie National Forest flight restrictions to the north and east
- proximity to Zion National Park no-drone zone to the south (distance)
- Open high desert terrain with minimal restrictions beyond airport
Airports in the area: Cedar City Regional Airport (CDC)
Why Cedar City Project Managers Choose Aerius View
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Cedar City
Operators working Iron County daily — familiar with Cedar City Micropolitan Area airspace including Cedar City Regional Airport and local permitting.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
Expect the first call within 2 business days from an operator covering Iron County.
AeriusView is expanding in Cedar City, UT
AeriusView is building its Cedar City network now — active development work by teams like Southern Utah University keeps demand high. Nearby coverage is live across 4 surrounding cities, so projects in Cedar City are matched on arrival.
Request a QuoteWhat Deliverables Do You Get?
Every Cedar City project includes professional-grade deliverables compatible with the construction and engineering software used across the Cedar City Micropolitan Area. Projects like those delivered for Southern Utah University across Iron County need data that drops straight into their workflow.
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- Coordinate systems matched to your project datum — the Utah State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Cedar City project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. Cedar City follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The Dixie National Forest to the north and east requires US Forest Service permits for commercial flights. Zion National Park is to the south but distant enough that most Cedar City operations are unaffected.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Iron County bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Cedar City requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Cedar City construction sites, including flight plans that avoid worker areas and equipment zones. Cedar City follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The Dixie National Forest to the north and east requires US Forest Service permits for commercial flights. Zion National Park is to the south but distant enough that most Cedar City operations are unaffected.
Cedar City Aerial Imaging FAQ
What drone services are most needed in Cedar City?
Southern Utah University campus expansion creates institutional construction monitoring demand. Cedar City Hospital expansion requires healthcare facility data collection. Residential development requires topographic data collection and progress monitoring. The Cedar City Industrial Park creates manufacturing facility construction data collection needs. Tourism infrastructure for Brian Head and Cedar Breaks provides seasonal commercial data collection work.
Does Cedar City have controlled airspace?
Cedar City Regional Airport (CDC) has Class D airspace. Drone operators flying within the Class D radius need LAANC authorization. The airport serves commercial flights and general aviation.
Can I fly a drone near Cedar Breaks National Monument?
Cedar Breaks National Monument, approximately 25 miles east of Cedar City, is managed by the National Park Service. Drone operations are prohibited within the monument boundaries without a special use permit. The monument is at high elevation (over 10,000 feet) and the access road is seasonal.
How does Cedar City elevation affect drone flying?
Cedar City sits at approximately 5,800 feet elevation. The high elevation significantly reduces drone lift capacity and battery life. The surrounding mountains, including the Markagunt Plateau, rise above 10,000 feet. Winter temperatures frequently drop below freezing. The Brian Head ski area nearby is at over 9,000 feet, making drone operations there extremely challenging.
Does Cedar City have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths, preempting local municipalities. Cedar City follows FAA Part 107 regulations without additional local drone-specific ordinances.
What makes Cedar City unique for aerial imaging?
Cedar City is a regional hub for southwestern Utah, serving as a gateway to multiple national parks and monuments. The university, healthcare, and industrial sectors create diverse construction monitoring demand. The high elevation creates operational challenges. The tourism gateway role creates seasonal commercial data collection and aerial photography demand for hospitality development.
Aerial Imaging Terms for Cedar City Projects
New to aerial imaging? These are the terms you will see in Cedar City project quotes and deliverables. Most Cedar City projects in our cost table start around $250.
Ground Sample Distance
The spatial resolution of drone imagery, measured in cm/pixel.
Orthomosaic
A geometrically corrected aerial photo map stitched from many images.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Nearby Cities
Are You a Drone Operator in Cedar City?
Get pre-qualified leads from Cedar City and its 4 nearby communities. No membership fees, no monthly minimums. First lead free.
Ready to Start Your Project in Cedar City, UT?
Get matched with a local, FAA-certified drone operator serving Cedar City and 48+ surrounding zip codes. No cost, no obligation. Projects in Iron County start around $250.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.