Aerial Imaging Services in Clinton, UT
Growing Davis County suburb at 4,300 feet with residential expansion and flat terrain
The Ogden-Clearfield Metropolitan Area includes Clinton, where roughly 22,969 residents live in Davis County. Clinton is a growing Davis County suburb between Clearfield and Sunset. Construction is driven by residential subdivision development, commercial corridor projects along 1800 North and 2000 West, and the Clinton City Center area. The city has ongoing residential development expanding westward. The Hill AFB proximity creates military support facility demand.
Serving Davis County & the Ogden-Clearfield Metropolitan Area area
Request a Free Quote
Request a Clinton Drone Operator
Clinton Aerial Imaging Options
Clinton is a growing Davis County suburb between Clearfield and Sunset. Residential subdivision development and commercial corridor projects drive construction, with the flat terrain making aerial mapping operations straightforward.
What Drone Services Cost in Utah
These are typical Clinton-area project ranges, drawn from market data across Ogden-Clearfield Metropolitan Area. Your final price depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,700 | $7,500 |
| Drone Inspection | $550 | $3,200 |
| LiDAR Scanning | $2,825 | $13,100 |
| Environmental Monitoring | $1,400 | $6,550 |
| Aerial Imagery | $350 | $2,200 |
| Construction Monitoring | $750 | $4,200 |
| Real Estate Photography | $300 | $1,800 |
| Roof Inspection | $350 | $1,800 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Clinton? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Clinton Airspace, FAA Rules & Local Drone Laws
FAA Part 107 Requirements
All commercial drone operations in Utah require an active FAA Part 107 Remote Pilot Certificate — every operator matched to Clinton projects is verified.
State Drone Laws
Clinton follows FAA Part 107 regulations. Statewide, Utah drone law (SB 167 (2019), SB 210 (2021), Utah Code 72-18) sets the baseline for commercial operations — Part 107 rules apply on every Clinton job. Full Utah drone law →
Local Ordinances
Clinton follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths.
Restricted Airspace
- Ogden-Hinckley Airport Class D airspace nearby
- Hill AFB restricted airspace to the south (distance)
Airports in the area: Ogden-Hinckley Airport (OGD), Hill Air Force Base (HIF)
Clinton Construction & Development: An Aerial Perspective
Clinton is a growing Davis County suburb between Clearfield and Sunset. Construction is driven by residential subdivision development, commercial corridor projects along 1800 North and 2000 West, and the Clinton City Center area. The city has ongoing residential development expanding westward. The Hill AFB proximity creates military support facility demand.
Active Developers in the Area:
- Clinton City Center — Civic and commercial facility development
- Residential developers — Subdivision development expanding westward
- Commercial developers — Commercial corridor development along 1800 North
Why Clinton Contractors Trust Aerius View
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Clinton
Pilots who fly Clinton regularly — they know the Davis County staging spots, permit offices, and airspace quirks.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
A local operator contacts you within 2 business days — typical for Ogden-Clearfield Metropolitan Area jobs.
Aerial Data Professionals in Clinton, UT
FAA-certified, insured drone operators serving your area. Request a quote and we'll connect you with the right expert.
Ian Jack
Alpine Reality Capture
1 year experience
Services
Equipment
Service Area
Salt Lake City Metropolitan Area
Contact the professional through the form above. No phone or email is listed, all quotes go through AeriusView.
What Aerial Data Products Do You Receive in Clinton?
a Clinton project wraps with professional-grade deliverables built for the software stacks Davis County crews already run. Projects like those delivered for Clinton City Center across Davis County need data that drops straight into their workflow.
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Coordinate systems matched to your project datum — the Utah State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Clinton project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. Clinton follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Davis County bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Clinton requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Clinton construction sites, including flight plans that avoid worker areas and equipment zones. Clinton follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths.
Clinton, UT Drone & Aerial Imaging Questions
What drone services are most needed in Clinton?
Residential subdivision development data collection and construction monitoring are primary demands. The Clinton City Center area development creates commercial data collection demand. Commercial corridor development along 1800 North provides additional data collection work.
Is Clinton in controlled airspace?
Clinton is near Ogden-Hinckley Airport Class D airspace. Check the LAANC grid for your specific location. Hill AFB restricted airspace is to the south but may not directly affect Clinton.
How does Clinton elevation affect drone flying?
Clinton sits at approximately 4,300 feet elevation in Davis County. The elevation reduces drone performance. Summer temperatures above 95 degrees compound the density altitude effect. The flat terrain offers few obstacles but no wind protection.
Does Clinton have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths. Clinton follows FAA Part 107 regulations.
What makes Clinton unique for aerial imaging?
Clinton is a growing Davis County suburb positioned between Clearfield and Sunset. The residential development expanding westward and commercial corridor development provide steady data collection demand. The flat terrain and suburban character make aerial mapping operations straightforward with proper LAANC authorization.
How does Clinton compare to neighboring Clearfield for drone operations?
Clinton is adjacent to Clearfield but is further from Hill AFB restricted airspace, giving slightly more operating freedom. The residential character means less industrial data collection demand than Clearfield but more residential topographic data collection work. The airspace and elevation conditions are similar.
Aerial Imaging Terms for Clinton Projects
The vocabulary behind Clinton aerial data — useful before you request quotes. Most Clinton projects in our cost table start around $300.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Volumetrics
Cut/fill and stockpile volume calculations derived from terrain models.
Thermal Imaging
Infrared capture that reveals heat signatures for inspections.
Nearby Cities
Are You a Drone Operator in Clinton?
Serve Clinton and the wider Ogden-Clearfield Metropolitan Area : leads routed by service area, no fees to join, first lead free.
Ready to Start Your Project in Clinton, UT?
One form, then a Ogden-Clearfield Metropolitan Area-based operator follows up with a quote. No cost, no commitment. Projects in Davis County start around $300.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.