Aerial Imaging Services in Clovis, CA
From the 2,800-acre Loma Vista Specific Plan to Harlan Ranch and the Clovis Community Medical Center expansion, Fresno County's fastest-growing city is building master-planned communities at a pace that makes FAT Class C airspace coordination essential for every data collection.
Serving Fresno County & the Fresno-Clovis area
Request a Free Quote
Get Matched With a Local Drone Operator
Aerial Imaging Services Available in Clovis, CA
Clovis is the fastest-growing city in Fresno County, driven by the Loma Vista Specific Plan (2,800 acres of master-planned development), Harlan Ranch, and the Clovis Community Medical Center expansion. The Clovis-Fresno metro is the largest urban area in the Central Valley.
Aerial Imaging for Clovis's Construction Market
Clovis is the fastest-growing city in Fresno County, driven by the Clovis General Plan expansion into the Harlan Ranch and Loma Vista areas. The Loma Vista Specific Plan covers approximately 2,800 acres of master-planned residential, commercial, and mixed-use development southeast of the city. The Clovis Community Medical Center expansion is a major institutional construction project. Old Town Clovis continues to see infill commercial development along Clovis Avenue. The Temperance Avenue corridor extension is opening new development frontiers. Residential tract construction in northeast Clovis is among the highest volume in the Central Valley.
Active Developers in the Area:
- Lewis Management (Harlan Ranch MPC)
- Wathen-Castanos (Loma Vista residential)
- Community Health System (Clovis Community Medical Center expansion)
- Granville Homes (northeast Clovis residential)
- City of Clovis (Temperance Avenue corridor, Old Town infill)
Typical Project Costs in California
Cost ranges are based on market data for Fresno-Clovis. Actual pricing depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,600 | $4,000 |
| Drone Inspection | $250 | $800 |
| LiDAR Scanning | $2,500 | $7,500 |
| Environmental Monitoring | $750 | $2,600 |
| Aerial Imagery | $150 | $450 |
| Construction Monitoring | $900 | $2,600 |
| Real Estate Photography | $150 | $400 |
| Roof Inspection | $200 | $700 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Clovis? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Local Airspace & Regulations in Clovis, CA
FAA Part 107 Requirements
All commercial drone operations in California require the pilot to hold an active FAA Part 107 Remote Pilot Certificate. Our network operators are verified Part 107 holders.
State Drone Laws
California AB 527 (2023) establishes statewide drone regulations including mandatory registration of commercial operators, prohibition of flights over critical infrastructure facilities (refineries, power plants, water treatment, dams) without consent, and privacy protections prohibiting surveillance of private property without consent. California state law preempts most local drone ordinances, though cities retain authority to regulate takeoff and landing on public property. All commercial drone operators must hold a valid FAA Part 107 Remote Pilot Certificate and comply with LAANC airspace authorization requirements near airports.
Local Ordinances
The City of Clovis requires a commercial drone permit for operations taking off or landing on city-owned property, including parks, the Clovis Trail System, and public facilities. The Clovis Parks and Recreation Department issues special use permits. Flights from private property (with owner permission) do not require a city permit but must comply with FAA Part 107 rules. Fresno Yosemite International Airport airspace coordination is managed through LAANC. Clovis bans drone flights over the Clovis Rodeo Grounds and Clovis High School stadium during events.
Restricted Airspace
- Class C airspace around Fresno Yosemite International Airport (FAT) — extends approximately 5 nautical miles from the airport. LAANC authorization required for commercial drone flights within this zone. Clovis is partially within the FAT Class C shelf.
- Class D airspace around Fresno Chandler Executive Airport (FCH) — located in downtown Fresno, approximately 10 miles southwest of Clovis. Requires LAANC authorization within 4 nautical miles.
- Sierra National Forest — drone flights are restricted in designated wilderness areas east of Clovis. Permits required from the US Forest Service for commercial operations taking off or landing on forest land.
- Fresno County irrigation canals and water infrastructure — California AB 527 designates water treatment facilities and distribution infrastructure as critical infrastructure. Drone flights over Fresno Irrigation District facilities require operator consent.
- Clovis Community Medical Center campus — hospital helipad creates a temporary flight restriction zone. Drone flights near the helipad require coordination with hospital security and FAA LAANC.
Airports in the area: FAT — Fresno Yosemite International Airport (Class C airspace, 8 miles southwest), FCH — Fresno Chandler Executive Airport (Class D, downtown Fresno, 10 miles southwest), O28 — Coalinga Municipal Airport (uncontrolled, 60 miles west, advisory only)
Why Hire Through Aerius View in Clovis, CA?
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Clovis
Operators who know the California airspace and local permitting.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
A local operator contacts you within 2 business days.
AeriusView is expanding in clovis, CA
We are actively onboarding verified aerial data professionals in your area. Submit a project request and we will connect you with a qualified expert soon.
Request a QuoteWhat Deliverables Do You Get?
Every project includes professional-grade deliverables compatible with standard construction and engineering software:
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Coordinate systems matched to your project datum (State Plane, UTM, or local)
Insurance & Liability Protection
Pilot Insurance Required
Every operator in our network must carry active liability insurance. Minimum coverage: $1,000,000 general liability. Proof of insurance is verified before any pilot joins the network.
FAA Part 107 Verified
We confirm each pilot's Remote Pilot Certificate is active and in good standing through the FAA Airmen Inquiry system. Expired certificates are flagged automatically.
Equipment Documentation
Pilots list their drone models, sensors (RGB, LiDAR, thermal, multispectral), and payload specs so we can match the right equipment to your project requirements.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active construction sites, including flight plans that avoid worker areas and equipment zones.
Clovis, CA Aerial Imaging FAQs
Do I need a permit for an aerial imaging in Clovis?
You need a City of Clovis commercial drone permit only if you plan to take off or land on city-owned property, including parks and the Clovis Trail System. data collection projects conducted from private property (with owner permission) do not require a city permit. All commercial drone operations require an FAA Part 107 Remote Pilot Certificate.
How much does an aerial imaging cost in the Clovis area?
Topographic data collection projects in the Clovis-Fresno metro typically range from $1,600 to $4,000. Roof inspections run $200-$700. LiDAR scanning for larger master-planned community sites like Loma Vista can cost $2,500-$7,500. Real estate drone photography starts at $150.
Can drones fly near Fresno Yosemite International Airport from Clovis?
Fresno Yosemite International Airport (FAT) has Class C controlled airspace that partially extends over southwest Clovis. Commercial drone flights within this airspace require LAANC authorization from the FAA. Our network drone operators handle all LAANC approvals and coordinate with FAT tower operations.
What is the Loma Vista Specific Plan and how does it affect data collection demand?
The Loma Vista Specific Plan covers approximately 2,800 acres southeast of Clovis with master-planned residential, commercial, and mixed-use development. It is one of the largest active master-planned communities in the Central Valley, generating sustained demand for topographic data collection, construction monitoring, earthwork verification, and aerial documentation.
Are there restrictions near the Sierra National Forest?
Designated wilderness areas in the Sierra National Forest east of Clovis prohibit drone takeoff and landing. Commercial drone operations on non-wilderness forest land require a permit from the US Forest Service. Our drone operators coordinate with the Sierra National Forest supervisor's office for any work near forest boundaries.
How does Clovis growth compare to Fresno?
Clovis is the fastest-growing city in Fresno County, with the Loma Vista and Harlan Ranch master-planned communities driving residential expansion southeast and northeast of the city. The Temperance Avenue corridor extension is opening new development frontiers. Clovis consistently outpaces Fresno in per-capita residential building permit volume.
Key Aerial Imaging Terms
New to aerial imaging? These essential terms will help you understand your project deliverables.
Ground Sample Distance
The spatial resolution of drone imagery, measured in cm/pixel.
Orthomosaic
A geometrically corrected aerial photo map stitched from many images.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Are You a Drone Operator in Clovis?
Get pre-qualified leads in your service area. No membership fees, no monthly minimums. First lead free.
Ready to Start Your Project in Clovis, CA?
Get matched with a local, FAA-certified drone operator. No cost, no obligation.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.