Topographic Data Collection in Dacono, CO
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Weld County & the Denver-Aurora-Lakewood MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Dacono, CO
Low End
$1,200
High End
$4,800
Turnaround
3-7 days
Cost ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Dacono
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Dacono. Here's what's driving demand:
Dacono is experiencing rapid residential growth as part of the North I-25 corridor expansion zone, with an annual growth rate of approximately 4-6% through 2024. The city is positioned in the Carbon Valley submarket, which includes Dacono, Frederick, and Firestone. Major residential developments include the Grand View subdivision expansion and the Carbon Valley Regional Park area development. Infrastructure spending has focused on the I-25 frontage road improvements and the Carbon Valley water infrastructure upgrades. Light industrial and commercial development is occurring along the US-52 corridor.
Major Developers Active in the Area:
Colorado drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Dacono meets all federal and state requirements.
Drone Regulations in Dacono, CO
Airports & LAANC Zones
- BJC — Rocky Mountain Metropolitan Airport (Class D, GA, 25 miles southwest)
- DEN — Denver International Airport (Class B, 35 miles southeast; Mode C veil extends over Dacono)
- LMO — Vance Brand Municipal Airport (Class E, non-towered, 10 miles northwest in Longmont)
- GXY — Greeley-Weld County Airport (Class D, GA, 20 miles northeast)
Restricted Airspace
- Dacono falls within the 30-nautical-mile Mode C veil around Denver International Airport. While Class B surface-area floors typically start at 8,000-10,000 ft MSL (well above drone operating altitudes of 400 ft AGL), operators must be aware of the Mode C transponder requirement for manned aircraft in this area.
- KLMO (Vance Brand/Longmont) Class D is approximately 10 miles northwest. KGXY (Greeley-Weld) Class D is 20 miles northeast. Neither directly overlays Dacono.
- Oil and gas corridor of southwestern Weld County with numerous active natural gas wells, pipelines, and processing facilities. The Tri-State Generation and Transmission Association power infrastructure and historical coal mine operations are present.
- No national parks nearby. Rocky Mountain National Park is approximately 45 miles northwest and prohibits drones.
- No permanent TFRs. Temporary TFRs may be issued for wildfire incidents and VIP movements.
Local Ordinances
Dacono Municipal Code Chapter 11 covers parks and recreation with general park rules prohibiting activities that create a public nuisance or hazard. Drone operations in city parks may be subject to these general provisions. City Code 9.20 covers nuisances and could apply to drone operations creating unreasonable noise or disturbance. Commercial filming and photography in Dacono requires coordination with City Hall. City Code Chapter 5.04 requires a business license for commercial operations within city limits.
All drone operations in Dacono must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Dacono airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Dacono, CO
How much does a drone topographic data collection cost in Dacono?
Drone topographic data collection projects in Dacono typically range from $1,200 to $4,800 with 3-7 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Dacono, CO
Does the Denver International Airport Class B airspace affect drone flights in Dacono?
Dacono falls within the 30-nautical-mile Mode C veil around Denver International Airport (KDEN). While the Class B surface-area floors in this region typically start at 8,000-10,000 ft MSL (well above standard drone operating altitudes of 400 ft AGL), operators must be aware of the Mode C transponder requirement for manned aircraft. Drone operations at or below 400 ft AGL in Class E airspace under the Class B shelf do not require specific Class B authorization.
What should drone operators know about oil and gas infrastructure in Dacono?
Dacono sits in the active oil and gas corridor of southwestern Weld County. Numerous natural gas wells, pipelines, and processing facilities are in the area. While there are no FAA restricted areas specifically for oil and gas facilities, operators should observe facility security perimeters, avoid flying directly over active well sites without permission, and coordinate with site operators for any inspection work.
Do commercial drone operators need a business license in Dacono?
Yes. Under City Code Chapter 5.04, commercial businesses operating within Dacono city limits must obtain a business license. Drone operators must also hold a valid FAA Part 107 Remote Pilot Certificate and carry appropriate liability insurance for commercial operations.
What controlled airspace is nearest to Dacono?
The nearest controlled airspace (Class D) is Vance Brand Municipal Airport (KLMO) in Longmont, approximately 10 miles northwest, and Erie Municipal Airport approximately 8 miles southwest in Class E. Most Dacono operations are in uncontrolled Class E airspace. Operators should check the KDEN Class B Mode C veil boundaries to ensure compliance.
What residential development projects are driving aerial imaging demand in Dacono?
Dacono is part of the rapidly growing Carbon Valley submarket, with national homebuilders including DR Horton, Lennar, Richmond American Homes, and KB Home actively developing residential subdivisions. The Grand View subdivision expansion and infrastructure projects along the US-52 corridor and I-25 frontage road are the primary drivers of demand for topographic, construction progress, and site data collection drone services.
All Aerial Imaging Services in Dacono, CO
Compare pricing across all aerial imaging services available in Dacono, Colorado.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,200 | $4,800 | 3-7 days |
| Drone Inspection | $800 | $3,500 | 2-5 days |
| LiDAR Scanning | $3,000 | $9,000 | 5-10 days |
| Environmental Monitoring | $1,000 | $4,500 | 3-7 days |
| Aerial Imagery | $500 | $2,200 | 1-3 days |
| Construction Monitoring | $1,000 | $5,500 | 2-7 days |
| Real Estate Photography | $400 | $2,000 | 1-3 days |
| Roof Inspection | $350 | $1,800 | 1-3 days |
Pricing ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Dacono, CO?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Dacono and the surrounding Denver-Aurora-Lakewood MSA area.
Apply to Join