Topographic Data Collection in Frederick, CO
High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.
Serving Weld County & the Denver-Aurora-Lakewood MSA area
Request a Free Quote
Get Matched With a Local Operator
Topographic Data Collection Pricing in Frederick, CO
Low End
$1,200
High End
$4,600
Turnaround
3-5 days
Cost ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual pricing depends on site size, complexity, and deliverables.
Common Topographic Data Collection Applications in Frederick
- Site planning and feasibility studies
- Earthwork and cut/fill volume verification
- Pre-construction baseline data collection projects
- Drainage and grading design support
Construction & Development Projects
Topographic data collection projects are essential for site planning in Frederick. Here's what's driving demand:
Frederick is part of the Carbon Valley tri-town area (Frederick, Firestone, Dacono) which is among the fastest-growing submarkets in Weld County, with annual growth rates of 3-4%. The town has seen sustained residential development along the Colorado 52 and Colorado 119 corridors, with multiple subdivisions adding hundreds of units annually. Infrastructure spending focuses on the Carbon Valley Parkway extension, water system upgrades, and new school construction in the St. Vrain Valley School District.
Major Developers Active in the Area:
Colorado drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Frederick meets all federal and state requirements.
Drone Regulations in Frederick, CO
Airports & LAANC Zones
- DEN — Denver International Airport (Class B, 25 miles south; outer shelves at 12,000 MSL)
- GXY — Greeley-Weld County Airport (Class D, 12 miles northeast; surface to 7,200 MSL)
- LMO — Vance Brand Airport (Class E, non-towered, 10 miles southwest in Longmont)
- FNL — Northern Colorado Regional Airport (Class D, 20 miles northwest near Loveland/Fort Collins)
Restricted Airspace
- KGXY Class D surface to 7,200 MSL within approximately 4 nautical miles. The northeastern edge of Frederick falls within or near this Class D airspace. LAANC authorization required for flights in this area.
- KDEN Class B outer shelves at 12,000 MSL. Standard drone operations below 400 AGL are not impacted.
- Weld County oil and gas operations: Frederick is in the heart of the Wattenberg Field, the most productive oil and gas field in the Denver-Julesburg Basin. Numerous well pads, compressor stations, and processing facilities throughout the area.
- St. Vrain State Park (just south of Frederick) requires a special use permit from Colorado Parks and Wildlife for drone operations.
- No military bases nearby. Buckley Space Force Base is approximately 40 miles southeast.
Local Ordinances
Frederick Municipal Code Chapter 12 addresses nuisance regulations applicable to drone operations causing disturbances. The town does not have a dedicated drone ordinance but regulates activity through general nuisance and parks provisions. Frederick Parks Regulations require operators to contact Parks and Recreation for authorization to fly in town parks. Commercial filming including drone work may require a business license from the town. Operators should comply with Colorado Revised Statutes regarding drone privacy (C.R.S. 18-9-304.5).
All drone operations in Frederick must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Frederick airports. Our network operators handle all permitting and airspace authorizations as part of their service.
Topographic Data Collection FAQ — Frederick, CO
How much does a drone topographic data collection cost in Frederick?
Drone topographic data collection projects in Frederick typically range from $1,200 to $4,600 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).
How accurate are drone topographic data collection projects?
With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.
What deliverables do I receive?
Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.
Drone Regulations FAQ — Frederick, CO
What controlled airspace affects drone operations in Frederick?
Frederick falls within or near the KGXY (Greeley-Weld County Airport) Class D airspace, which extends to 7,200 feet MSL within approximately 4 nautical miles. The northeastern edge of Frederick is within this area, requiring LAANC authorization. Most of central and southern Frederick is in uncontrolled Class E airspace. Operators should check the FAA UAS Facility Maps for specific boundaries.
How do oil and gas operations in the Frederick area impact aerial imaging planning?
Frederick is in the heart of the Wattenberg Field, the most productive oil and gas field in the Denver-Julesburg Basin. Numerous well pads, compressor stations, and processing facilities are throughout the area. While no formal TFRs typically exist for these facilities, operators should coordinate with site operators when aerial imaging adjacent properties and maintain safe distances from active equipment.
Do commercial drone operators need a business license in Frederick?
Frederick may require a business license for commercial operators conducting business within town limits. Operators must hold a valid FAA Part 107 Remote Pilot Certificate and carry appropriate liability insurance. Contact the Town Clerk for specific requirements and any film permit needs.
What residential development projects are driving aerial imaging demand in Frederick?
The Carbon Valley tri-town area (Frederick, Firestone, Dacono) is among the fastest-growing submarkets in Weld County with 3-4% annual growth. National homebuilders including DR Horton, Lennar, KB Home, and Richmond American are actively developing subdivisions along the Colorado 52 and 119 corridors. The Carbon Valley Parkway extension and water system upgrades also create infrastructure data collection demand.
Can I fly a drone in Frederick town parks?
Frederick Parks Regulations require operators to contact the Parks and Recreation Department for authorization before flying drones in town parks. The town does not have a formal drone-specific permit process but requires FAA Part 107 compliance for commercial operations. St. Vrain State Park, just south of Frederick, requires a special use permit from Colorado Parks and Wildlife.
All Aerial Imaging Services in Frederick, CO
Compare pricing across all aerial imaging services available in Frederick, Colorado.
| Service | Low End | High End | Turnaround |
|---|---|---|---|
| Topographic Data Collection ← you are here | $1,200 | $4,600 | 3-5 days |
| Drone Inspection | $750 | $2,900 | 2-4 days |
| LiDAR Scanning | $2,800 | $8,200 | 5-7 days |
| Environmental Monitoring | $1,100 | $4,200 | 3-5 days |
| Aerial Imagery | $500 | $2,100 | 1-3 days |
| Construction Monitoring | $950 | $3,600 | 2-4 days |
| Real Estate Photography | $300 | $1,300 | 1-2 days |
| Roof Inspection | $350 | $1,500 | 1-3 days |
Pricing ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual costs depend on project scope, site conditions, and required deliverables.
Other Aerial Imaging Services in Frederick, CO
Topographic Data Collection in Nearby Cities
Are You a Drone Operator in Frederick, CO?
Join our network of FAA-certified operators. Get matched with topographic data collection projects in Frederick and the surrounding Denver-Aurora-Lakewood MSA area.
Apply to Join