Topographic Data Collection in Firestone, CO

High-resolution terrain mapping using drone photogrammetry and LiDAR. Get contour maps, surface models, and volumetric calculations for construction, engineering, and land development.

$1,150–$4,400 | 3-5 days

Serving Weld County & the Denver-Aurora-Lakewood MSA area

Request a Free Quote
Drone conducting topographic data collection in Firestone, Colorado — professional aerial mapping services

Get Matched With a Local Operator

Topographic Data Collection Pricing in Firestone, CO

Low End

$1,150

High End

$4,400

Turnaround

3-5 days

Cost ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual pricing depends on site size, complexity, and deliverables.

Common Topographic Data Collection Applications in Firestone

  • Site planning and feasibility studies
  • Earthwork and cut/fill volume verification
  • Pre-construction baseline data collection projects
  • Drainage and grading design support

Construction & Development Projects

Topographic data collection projects are essential for site planning in Firestone. Here's what's driving demand:

Firestone is the fastest-growing of the Carbon Valley tri-town area (Frederick, Firestone, Dacono), with annual growth rates of 5-7% driven by its position along the I-25 corridor and relatively affordable land. Major residential developments include the Firestone Town Center, Saddleback at Firestone, and multiple subdivisions along the Colorado 119 corridor. Infrastructure spending includes the Firestone Boulevard extension, water system upgrades, and new school construction in the St. Vrain Valley School District serving the Carbon Valley.

Major Developers Active in the Area:

DR Horton (Active national homebuilder with multiple subdivisions in Firestone; largest volume builder in the Carbon Valley)Lennar (Building in Firestone-area subdivisions with affordable and move-up housing)KB Home (Active in the Carbon Valley with residential projects along Colorado 119)Richmond American Homes (Building in Firestone and adjacent Frederick developments)

Colorado drone regulations require FAA Part 107 certification for all commercial drone operations. Our network of verified operators in Firestone meets all federal and state requirements.

Drone Regulations in Firestone, CO

Airports & LAANC Zones

  • DEN — Denver International Airport (Class B, 25 miles south; outer shelves at higher altitudes)
  • GXY — Greeley-Weld County Airport (Class D, 15 miles northeast)
  • LMO — Vance Brand Airport (Class E, non-towered, 8 miles southwest in Longmont)
  • FNL — Northern Colorado Regional Airport (Class D, 20 miles northwest)

Restricted Airspace

  • KGXY Class D surface to 7,200 MSL within approximately 4 NM. Northeastern edge of Firestone may fall within this area. LAANC authorization may be required for northeastern areas.
  • KDEN Class B outer shelves at higher altitudes. Standard drone operations below 400 AGL not impacted.
  • Weld County oil and gas operations: Firestone is in the Wattenberg Field with numerous well pads, compressor stations, and pipelines throughout the Carbon Valley area.
  • St. Vrain State Park just south of Firestone requires a special use permit from Colorado Parks and Wildlife for drone operations.
  • No military bases nearby. Buckley SFB is approximately 35 miles south.

Local Ordinances

Firestone Municipal Code regulates drone operations through general nuisance and parks provisions. The town requires commercial drone operators to comply with FAA Part 107 regulations. Drone takeoff and landing in town parks requires authorization from the Parks and Recreation Department. Commercial filming permits may be obtained through the Town Clerks Office. Firestone does not have a standalone drone-specific ordinance.

All drone operations in Firestone must comply with FAA Part 107 rules. Operators must obtain LAANC authorization before flying in controlled airspace near Firestone airports. Our network operators handle all permitting and airspace authorizations as part of their service.

Topographic Data Collection FAQ — Firestone, CO

How much does a drone topographic data collection cost in Firestone?

Drone topographic data collection projects in Firestone typically range from $1,150 to $4,400 with 3-5 days turnaround. Pricing depends on site size, terrain complexity, and required deliverables (contour interval, DEM, point cloud).

How accurate are drone topographic data collection projects?

With RTK/PPK GPS correction and ground control points, drone photogrammetry achieves 1-3 cm horizontal and 2-5 cm vertical accuracy. For higher precision, LiDAR scanning can deliver sub-centimeter results.

What deliverables do I receive?

Standard deliverables include a geo-referenced orthomosaic, digital elevation model (DEM), digital terrain model (DTM), contour lines, point cloud (LAS/LAZ), and a data collection report with accuracy metrics.

Drone Regulations FAQ — Firestone, CO

What controlled airspace affects drone operations in Firestone?

Firestone may fall within or near the KGXY (Greeley-Weld County Airport) Class D airspace, which extends to 7,200 feet MSL within approximately 4 nautical miles. The northeastern edge of Firestone is closest to this area. Most of central and southern Firestone is in uncontrolled Class E airspace. Operators should check the FAA UAS Facility Maps.

What construction projects are driving aerial imaging demand in Firestone?

The Firestone Town Center, Saddleback at Firestone, and multiple subdivisions along the Colorado 119 corridor are the primary drivers. Firestone is the fastest-growing Carbon Valley town at 5-7% annual growth, creating sustained demand for topographic, construction progress, and site data collection work. The Firestone Boulevard extension and water system upgrades add infrastructure data collection demand.

How do oil and gas operations in the Firestone area impact aerial imaging planning?

Firestone is in the Wattenberg Field with numerous well pads, compressor stations, and pipelines throughout the Carbon Valley. Operators should coordinate with site operators when aerial imaging adjacent properties, maintain safe distances from active equipment, and review current FAA facility maps for any TFRs around critical energy infrastructure.

Do commercial drone operators need a business license in Firestone?

Firestone may require a business license for commercial operators. Operators must hold a valid FAA Part 107 Remote Pilot Certificate and carry appropriate liability insurance. Contact the Town Clerks Office for specific requirements and any film permit needs.

Can I fly a drone in Firestone town parks?

Drone takeoff and landing in Firestone town parks requires authorization from the Parks and Recreation Department. The town does not have a formal drone-specific permit process but requires FAA Part 107 compliance. St. Vrain State Park, just south of Firestone, requires a special use permit from Colorado Parks and Wildlife.

All Aerial Imaging Services in Firestone, CO

Compare pricing across all aerial imaging services available in Firestone, Colorado.

Service Low End High End Turnaround
Topographic Data Collection ← you are here $1,150 $4,400 3-5 days
Drone Inspection $730 $2,800 2-4 days
LiDAR Scanning $2,700 $8,000 5-7 days
Environmental Monitoring $1,100 $4,300 3-5 days
Aerial Imagery $480 $2,050 1-3 days
Construction Monitoring $920 $3,500 2-4 days
Real Estate Photography $280 $1,250 1-2 days
Roof Inspection $330 $1,450 1-3 days

Pricing ranges are based on market data for Denver-Aurora-Lakewood MSA. Actual costs depend on project scope, site conditions, and required deliverables.

Are You a Drone Operator in Firestone, CO?

Join our network of FAA-certified operators. Get matched with topographic data collection projects in Firestone and the surrounding Denver-Aurora-Lakewood MSA area.

Apply to Join