Aerial Imaging Services in Kaysville, UT
Fast-growing Davis County city with east bench Wasatch Mountain views and west side valley residential expansion
With about 33,450 people in Davis County, Kaysville is a community in the Salt Lake City Metropolitan Area of Utah. Kaysville is a fast-growing Davis County city with significant residential development.
Serving Davis County & the Salt Lake City Metropolitan Area area
Request a Free Quote
Find a Davis County Drone Pilot
Aerial Imaging Services Available in Kaysville, UT
Kaysville is a fast-growing Davis County city with significant residential development.
Airspace & Flying Rules in Kaysville, UT
FAA Part 107 Requirements
Commercial flights over Kaysville fall under FAA Part 107: the pilot must hold a current Remote Pilot Certificate. Network operators are checked before matching.
State Drone Laws
Drone rules in Kaysville layer two ways: Kaysville follows FAA Part 107 regulations. plus Utah statewide UAS law (SB 167 (2019), SB 210 (2021), Utah Code 72-18) governing commercial flights. Full Utah drone law →
Local Ordinances
Kaysville follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace. The east bench has hillside residential development with mountain terrain awareness needs.
Restricted Airspace
- Salt Lake City International Airport Class B airspace
- Wasatch Mountain terrain to the east
- I-15 corridor flight path awareness
Airports in the area: Salt Lake City International Airport (SLC)
Utah Aerial Imaging Cost Guide
Pricing below reflects the Salt Lake City Metropolitan Area market. Site size, terrain, and the deliverables you need move the final number up or down.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,800 | $7,950 |
| Drone Inspection | $575 | $3,350 |
| LiDAR Scanning | $2,975 | $13,800 |
| Environmental Monitoring | $1,475 | $6,800 |
| Aerial Imagery | $375 | $2,300 |
| Construction Monitoring | $775 | $4,350 |
| Real Estate Photography | $325 | $1,900 |
| Roof Inspection | $375 | $1,900 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Kaysville? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Aerial Imaging Solutions for Kaysville's Development Pipeline
Kaysville is a fast-growing Davis County city with significant residential development. Construction is driven by east bench hillside residential construction, the Station Park area commercial growth spillover from Farmington, infill development in established neighborhoods, and the Kaysville Business Park expansion. The city has substantial agricultural-to-residential land conversion on the west side and luxury home construction on the east bench.
Active Developers in the Area:
- East bench residential developers — Hillside luxury residential construction with Wasatch Mountain views
- Kaysville Business Park — Commercial and light industrial park expansion
- West side residential developers — Agricultural land conversion to residential subdivisions
Why Developers in Kaysville Use Aerius View
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Kaysville
Local crews covering Kaysville and 3 surrounding cities, already current on Utah airspace and LAANC workflows.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
Quotes in Kaysville commonly move inside 2 business days once your request is in.
Aerial Data Professionals in Kaysville, UT
FAA-certified, insured drone operators serving your area. Request a quote and we'll connect you with the right expert.
Ian Jack
Alpine Reality Capture
1 year experience
Services
Equipment
Service Area
Salt Lake City Metropolitan Area
Contact the professional through the form above. No phone or email is listed, all quotes go through AeriusView.
Your Project Deliverables Explained
Every deliverable below ships with your Kaysville project, formatted for the construction and engineering platforms used throughout the Salt Lake City Metropolitan Area. Projects like those delivered for East bench residential developers across Davis County need data that drops straight into their workflow.
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Coordinate systems matched to your project datum — the Utah State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Kaysville project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. Kaysville follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace. The east bench has hillside residential development with mountain terrain awareness needs.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Davis County bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Kaysville requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Kaysville construction sites, including flight plans that avoid worker areas and equipment zones. Kaysville follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. The city is within the Salt Lake City Class B airspace. The east bench has hillside residential development with mountain terrain awareness needs.
Frequently Asked Questions — Kaysville Aerial Imaging
What makes Kaysville unique for aerial imaging in Utah?
Kaysville is a fast-growing Davis County city with both east bench luxury residential construction and west side agricultural-to-residential conversion. The varied terrain from valley floor to hillside creates diverse data collection needs. The Kaysville Business Park expansion creates commercial data collection demand. The city has strong infill development activity in established neighborhoods.
What drone services are most needed in Kaysville?
Residential subdivision data collection and construction monitoring are primary demands on both the east bench and west side. Topographic data collection projects for hillside construction and agricultural land conversion. Real estate photography for luxury bench homes. Business park expansion creates commercial data collection needs.
Is Kaysville in controlled airspace?
Yes, Kaysville is within the Salt Lake City International Airport Class B airspace. LAANC authorization is required for all flights. The east bench location near the mountains may affect GPS signal quality. Check the LAANC grid for authorization levels.
How does Kaysville elevation affect drone flying?
Kaysville ranges from approximately 4,260 feet on the valley floor to 4,800 feet on the east bench. The elevation reduces drone performance compared to sea level. The mountains to the east create afternoon thermal winds. Summer temperatures above 95 degrees compound the density altitude effect.
Does Kaysville have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths. Kaysville follows FAA Part 107 regulations without additional local drone-specific ordinances.
Can I fly a drone near the Kaysville Business Park?
The Kaysville Business Park is a commercial and light industrial area. Drone flights must follow Part 107 rules. The area is within the Salt Lake City Class B airspace, requiring LAANC authorization. Industrial inspection work may be available in this area.
Aerial Imaging Terms for Kaysville Projects
Understand what Kaysville drone operators mean when they quote orthomosaics, point clouds, and more. Most Kaysville projects in our cost table start around $325.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Volumetrics
Cut/fill and stockpile volume calculations derived from terrain models.
Thermal Imaging
Infrared capture that reveals heat signatures for inspections.
Multispectral
Band-specific imagery used for vegetation and crop analysis.
Nearby Cities
Are You a Drone Operator in Kaysville?
Construction and real-estate demand in Kaysville grows every quarter. Get pre-qualified leads in your service area — first one free.
Ready to Start Your Project in Kaysville, UT?
Free matching with FAA-verified pilots across Davis County and the Salt Lake City Metropolitan Area. Projects in Davis County start around $325.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.