Aerial Imaging Services in Moab, UT
Red rock desert canyon landscape with Colorado River and La Sal Mountains backdrop
The Moab Micropolitan Area includes Moab, where roughly 5,366 residents live in Grand County. Moab is a world-renowned outdoor recreation destination. Construction is driven by tourism infrastructure, including hotel and lodge development, restaurant construction, and the Moab Regional Airport expansion. The city has ongoing residential development for the tourism workforce. The uranium mining legacy creates environmental remediation construction demand. The Moab Brands retail area and commercial development along Main Street provide steady construction activity.
Serving Grand County & the Moab Micropolitan Area area
Request a Free Quote
Request a Moab Drone Operator
Moab Aerial Imaging Options
Moab is a world-renowned outdoor recreation destination surrounded by Arches and Canyonlands National Parks (both no-drone zones). Tourism infrastructure, airport expansion, and the DOE uranium remediation project drive construction, with the national park drone restrictions creating a complex operating environment.
Moab Airspace, FAA Rules & Local Drone Laws
FAA Part 107 Requirements
All commercial drone operations in Utah require an active FAA Part 107 Remote Pilot Certificate — every operator matched to Moab projects is verified.
State Drone Laws
Moab follows FAA Part 107 regulations. Statewide, Utah drone law (SB 167 (2019), SB 210 (2021), Utah Code 72-18) sets the baseline for commercial operations — Part 107 rules apply on every Moab job. Full Utah drone law →
Local Ordinances
Moab follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. Arches National Park, directly north of Moab, is a strict no-drone zone under National Park Service regulations. Canyonlands National Park to the southwest is also a no-drone zone. Dead Horse Point State Park has Utah State Parks drone restrictions. The surrounding BLM land may have additional restrictions.
Restricted Airspace
- Class D airspace around Canyonlands Field Airport (CNY)
- Arches National Park no-drone zone directly north of city (NPS restriction)
- Canyonlands National Park no-drone zone to the southwest (NPS restriction)
- Dead Horse Point State Park drone restrictions nearby
Airports in the area: Canyonlands Field Airport (CNY)
What Drone Services Cost in Utah
These are typical Moab-area project ranges, drawn from market data across Moab Micropolitan Area. Your final price depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,425 | $6,600 |
| Drone Inspection | $500 | $2,800 |
| LiDAR Scanning | $2,225 | $11,150 |
| Environmental Monitoring | $1,225 | $5,650 |
| Aerial Imagery | $350 | $2,050 |
| Construction Monitoring | $675 | $3,300 |
| Real Estate Photography | $300 | $1,550 |
| Roof Inspection | $300 | $1,550 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Moab? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Moab Construction & Development: An Aerial Perspective
Moab is a world-renowned outdoor recreation destination. Construction is driven by tourism infrastructure, including hotel and lodge development, restaurant construction, and the Moab Regional Airport expansion. The city has ongoing residential development for the tourism workforce. The uranium mining legacy creates environmental remediation construction demand. The Moab Brands retail area and commercial development along Main Street provide steady construction activity.
Active Developers in the Area:
- Tourism and hospitality developers — Hotel, lodge, and resort construction for the outdoor recreation market
- Moab Regional Airport — Airport facility expansion and terminal upgrades
- US Department of Energy — Uranium mill tailing remediation project near Moab
Why Moab Contractors Trust Aerius View
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Moab
Pilots who fly Moab regularly — they know the Grand County staging spots, permit offices, and airspace quirks.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
Quotes in Moab commonly move inside 2 business days once your request is in.
AeriusView is expanding in Moab, UT
Pilot coverage for Moab is filling in — surrounding Moab Micropolitan Area cities are already served. Requests from Moab are routed to the nearest verified operator.
Request a QuoteWhat Aerial Data Products Do You Receive in Moab?
a Moab project wraps with professional-grade deliverables built for the software stacks Grand County crews already run. Projects like those delivered for Tourism and hospitality developers across Grand County need data that drops straight into their workflow.
- Progress reports with side-by-side comparisons for construction monitoring
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Coordinate systems matched to your project datum — the Utah State Plane zone, UTM, or a local datum your surveyor specifies
Insurance & Liability Protection
Pilot Insurance Required
Every operator matched to a Moab project carries active liability insurance — minimum $1,000,000 general liability, verified from the certificate before the pilot joins the network. Moab follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. Arches National Park, directly north of Moab, is a strict no-drone zone under National Park Service regulations. Canyonlands National Park to the southwest is also a no-drone zone. Dead Horse Point State Park has Utah State Parks drone restrictions. The surrounding BLM land may have additional restrictions.
FAA Part 107 Verified
Each pilot's Remote Pilot Certificate is checked against the FAA Airmen Inquiry before they can serve Grand County bookings. Expired certificates are flagged automatically.
Equipment Documentation
Pilots register their airframes and sensors (RGB, LiDAR, thermal, multispectral) so Moab requests route to crews with the right payload for the job.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active Moab construction sites, including flight plans that avoid worker areas and equipment zones. Moab follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. Arches National Park, directly north of Moab, is a strict no-drone zone under National Park Service regulations. Canyonlands National Park to the southwest is also a no-drone zone. Dead Horse Point State Park has Utah State Parks drone restrictions. The surrounding BLM land may have additional restrictions.
Moab, UT Drone & Aerial Imaging Questions
Can I fly a drone in Arches National Park near Moab?
No. Arches National Park, directly north of Moab, is a strict no-drone zone under National Park Service regulations. Drone operations are prohibited within park boundaries without a special use permit, which are rarely granted. The park boundary is very close to Moab, so operators should check the NPS boundary map carefully.
What drone services are most needed in Moab?
Tourism infrastructure construction monitoring for hotels and lodges is a primary demand. The Moab Regional Airport expansion creates facility data collection needs. The DOE uranium mill tailing remediation project creates environmental monitoring demand. Real estate photography for tourism-related properties is a steady market. BLM land activity monitoring provides additional opportunities.
Can I fly a drone over Canyonlands National Park from Moab?
No. Canyonlands National Park to the southwest of Moab is also a no-drone zone under National Park Service regulations. The park is vast, and its boundary extends relatively close to Moab in some areas. Operators should check both Arches and Canyonlands NPS boundary maps before flying near Moab.
Does Moab have controlled airspace?
Canyonlands Field Airport (CNY) has Class D airspace. Drone operators flying within the Class D radius need LAANC authorization. The airport primarily serves general aviation and tourism charter traffic. The surrounding national park no-drone zones are the dominant constraint for drone operators.
How does Moab summer heat affect drone flying?
Moab experiences extreme summer temperatures frequently above 100 degrees. The desert environment provides no shade. Drone battery life and motor performance are severely reduced. The red rock terrain absorbs and radiates heat. Schedule flights for early morning hours. Carry extra batteries and monitor motor temperature closely.
Can I fly a drone on BLM land near Moab?
The Bureau of Land Management manages significant land around Moab outside the national parks. BLM land generally allows drone flights under FAA Part 107 rules, but check current BLM guidelines for any area-specific restrictions. The BLM land includes popular recreation areas like the Slickrock Bike Trail and Gemini Bridges that may have visitor safety considerations for drone flights.
Aerial Imaging Terms for Moab Projects
The vocabulary behind Moab aerial data — useful before you request quotes. Most Moab projects in our cost table start around $300.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Volumetrics
Cut/fill and stockpile volume calculations derived from terrain models.
Thermal Imaging
Infrared capture that reveals heat signatures for inspections.
Nearby Cities
Are You a Drone Operator in Moab?
Serve Moab and the wider Moab Micropolitan Area : leads routed by service area, no fees to join, first lead free.
Ready to Start Your Project in Moab, UT?
One form, then a Moab Micropolitan Area-based operator follows up with a quote. No cost, no commitment. Projects in Grand County start around $300.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.