Aerial Imaging Services in Orem, UT
Utah Valley tech hub at 4,750 feet with Wasatch Mountain backdrop and University Place development
Serving Utah County & the Provo-Orem Metropolitan Area area
Request a Free Quote
Get Matched With a Local Drone Operator
Aerial Imaging Services Available in Orem, UT
Orem is a Silicon Slopes tech hub home to Domo, DoTerra, and the University Place mixed-use development. Tech office construction, campus expansion, and residential growth drive aerial imaging demand, with the Provo Municipal Airport Class D airspace nearby.
Aerial Imaging for Orem's Construction Market
Orem is part of the Provo-Orem metro area and the Silicon Slopes tech corridor. Construction is driven by tech office development (Domo, DoTerra), the University Place mixed-use development, residential construction, and Utah Valley University campus expansion. The city is transforming from a suburban bedroom community to a tech hub, creating office and mixed-use construction demand. The Orem City Center redevelopment is an ongoing project.
Active Developers in the Area:
- University Place Development — Mixed-use development with retail, office, and residential components
- Domo — Tech office construction and campus development
- DoTerra — Corporate campus construction and facility expansion
Typical Project Costs in Utah
Cost ranges are based on market data for Provo-Orem Metropolitan Area. Actual pricing depends on site size, complexity, and deliverables.
| Service Type | Low End | High End |
|---|---|---|
| Topographic Data Collection | $1,700 | $7,500 |
| Drone Inspection | $550 | $3,200 |
| LiDAR Scanning | $2,800 | $13,000 |
| Environmental Monitoring | $1,400 | $6,500 |
| Aerial Imagery | $350 | $2,200 |
| Construction Monitoring | $750 | $4,200 |
| Real Estate Photography | $300 | $1,800 |
| Roof Inspection | $350 | $1,800 |
Free cost calculator, ROI calculator, and 14-page buyer's guide. No signup required.
Are you a drone operator serving Orem? List your business on AeriusView and get pre-qualified leads in your service area.
List Your Business →Local Airspace & Regulations in Orem, UT
FAA Part 107 Requirements
All commercial drone operations in Utah require the pilot to hold an active FAA Part 107 Remote Pilot Certificate. Our network operators are verified Part 107 holders.
State Drone Laws
Utah enacted SB 167 (2019), establishing state authority over UAS operations and preempting local municipalities from regulating drone flight paths, airspace, or pilot requirements. SB 210 (2021) added privacy protections and restrictions on drone surveillance of private property. Utah has significant restricted military airspace including Hill Air Force Base (home to F-35 and F-16 fighter wings and the Ogden Air Logistics Center), Dugway Proving Ground, and Utah Test and Training Range. The state also has extensive National Park and National Monument no-drone zones, including Zion, Bryce Canyon, Arches, Canyonlands, Capitol Reef, and Grand Staircase-Escalante. Commercial operators must hold a valid FAA Part 107 Remote Pilot Certificate. Utah does not require a separate state drone license. Operators flying near military installations, national parks, tribal lands, or ski areas must coordinate with the controlling agency. Utah mountain terrain and winter weather create significant operational challenges, with density altitude affecting performance at elevations above 5,000 feet and winter storms limiting flying windows.
Local Ordinances
Orem follows FAA Part 107 regulations. Under Utah state law (SB 167, 2019), only the state may regulate drone flight paths. Provo Municipal Airport Class D airspace is nearby. Utah Valley University campus may have restrictions on drone overflights.
Restricted Airspace
- Provo Municipal Airport Class D airspace nearby
- Wasatch Mountain Range terrain to the east
- Utah Valley location with moderate airspace constraints
Airports in the area: Provo Municipal Airport (PVU)
Why Hire Through Aerius View in Orem, UT?
FAA-Certified
Every operator holds an active Part 107 Remote Pilot Certificate.
Local to Orem
Operators who know the Utah airspace and local permitting.
No Cost to Quote
Submit your project at no charge. Pay the operator directly if you proceed.
Fast Turnaround
A local operator contacts you within 2 business days.
AeriusView is expanding in orem, UT
We are actively onboarding verified aerial data professionals in your area. Submit a project request and we will connect you with a qualified expert soon.
Request a QuoteWhat Deliverables Do You Get?
Every project includes professional-grade deliverables compatible with standard construction and engineering software:
- Orthomosaic maps (GeoTIFF) for site overview and documentation
- Point clouds (LAS/LAZ) for 3D modeling and volumetric analysis
- DEM/DSM terrain models for cut/fill and grade analysis
- Contour lines (DXF/DWG, CAD-ready) for Civil 3D and Revit
- Progress reports with side-by-side comparisons for construction monitoring
- Coordinate systems matched to your project datum (State Plane, UTM, or local)
Insurance & Liability Protection
Pilot Insurance Required
Every operator in our network must carry active liability insurance. Minimum coverage: $1,000,000 general liability. Proof of insurance is verified before any pilot joins the network.
FAA Part 107 Verified
We confirm each pilot's Remote Pilot Certificate is active and in good standing through the FAA Airmen Inquiry system. Expired certificates are flagged automatically.
Equipment Documentation
Pilots list their drone models, sensors (RGB, LiDAR, thermal, multispectral), and payload specs so we can match the right equipment to your project requirements.
Site Safety Coordination
Pilots coordinate with your site superintendent for safe operations on active construction sites, including flight plans that avoid worker areas and equipment zones.
Orem, UT Aerial Imaging FAQs
What drone services are most needed in Orem?
Tech office construction monitoring for Domo, DoTerra, and other Silicon Slopes companies is a primary demand. The University Place mixed-use development requires ongoing construction data collection. Utah Valley University campus expansion creates institutional data collection demand. Residential development requires topographic data collection and progress monitoring.
Is Orem in controlled airspace?
Orem is near the Provo Municipal Airport Class D airspace. Drone operators should check the Class D boundary on sectional charts. Much of Orem may be outside the Class D surface area but within its shelf. Check LAANC grid for your specific location.
How does Orem elevation affect drone flying?
Orem sits at approximately 4,750 feet elevation in the Utah Valley. The Wasatch Mountains to the east rise to over 11,000 feet. The elevation reduces drone performance. The mountain proximity creates variable wind conditions in afternoon. Summer temperatures above 95 degrees compound the density altitude effect.
What is the University Place development in Orem?
University Place is a major mixed-use development in Orem featuring retail, office, residential, and hotel components. The development includes a corporate center, shopping center, and residential towers. It is one of the largest private development projects in Utah County, creating sustained construction monitoring and aerial mapping demand.
Does Orem have its own drone ordinances?
No. Under Utah state law SB 167 (2019), only the state may regulate drone flight paths, preempting local municipalities. Orem follows FAA Part 107 regulations without additional local drone-specific ordinances.
What makes Orem part of Silicon Slopes?
Orem is home to several major tech companies including Domo, DoTerra, and numerous startups. The city is part of the Silicon Slopes tech corridor stretching from Provo to Lehi. The tech industry expansion drives office construction, campus development, and residential growth, creating sustained aerial imaging demand for commercial and residential construction monitoring.
Key Aerial Imaging Terms
New to aerial imaging? These essential terms will help you understand your project deliverables.
Ground Sample Distance
The spatial resolution of drone imagery, measured in cm/pixel.
Orthomosaic
A geometrically corrected aerial photo map stitched from many images.
Point Cloud
A 3D dataset of points representing the captured surface.
Real-Time Kinematic
RTK GPS correction for centimeter-level positional accuracy.
LiDAR
Laser scanning that captures terrain through vegetation.
Digital Elevation Model
A 3D representation of terrain elevation across the site.
Ground Control Point
Known reference markers used to anchor and validate mapping accuracy.
Aerial Mapping
Data collection from above to map and measure a site.
Are You a Drone Operator in Orem?
Get pre-qualified leads in your service area. No membership fees, no monthly minimums. First lead free.
Ready to Start Your Project in Orem, UT?
Get matched with a local, FAA-certified drone operator. No cost, no obligation.
Request a Free QuoteAeriusView connects clients with FAA-certified drone operators. Services are not licensed land surveying. Deliverables are not authoritative for boundary determination, design, or legal purposes.